CFD Online Logo CFD Online URL
Home > Forums > ANSYS Meshing & Geometry

[ANSYS Meshing] Error in making hexahedral mesh

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   May 27, 2014, 01:39
Default Error in making hexahedral mesh
New Member
Join Date: May 2014
Posts: 3
Rep Power: 5
gorge is on a distinguished road
I have a geometry of a cuboid with a cavity in it. Inside the cavity there is another smaller cuboid. I need to create a hexahedral mesh for the entire object. I used the multizone method. During the source and target face selection I am unable to select the faces of the object inside the cavity. Also an error is cropping up if I just select the outside block-

ERROR - MultiZone found free block in swept body.

Pls suggest.
gorge is offline   Reply With Quote


cfx, meshing, multizone

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
3D Hybrid Mesh Errors DarrenC ANSYS Meshing & Geometry 11 August 5, 2013 06:42
Layers:problem with curvature giulio.topazio OpenFOAM Native Meshers: snappyHexMesh and Others 10 August 22, 2012 09:03
friction forces icoFoam ofslcm OpenFOAM 3 April 7, 2012 10:57
2D Mesh Generation Tutorial for GMSH aeroslacker Open Source Meshers: Gmsh, Netgen, CGNS, ... 12 January 19, 2012 04:52
Icemcfd 11: Loss of mesh from surface mesh option? Joe CFX 2 March 26, 2007 18:10

All times are GMT -4. The time now is 04:13.