|
[Sponsors] |
[DesignModeler] I need an advance model of "form new part" ! |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 18, 2014, 07:11 |
I need an advance model of "form new part" !
|
#1 |
Senior Member
Amin
Join Date: Oct 2013
Location: Germany
Posts: 397
Rep Power: 14 |
Hi
I'm working on a project with fluent but I have a problem with ANSYS Meshing & Geometry! My domain include 3 separate parts! but as seem in the photo that attached, for middle part, at left and right edge I need an edge with other part and at top edge I need 2 separate edges! I use "form new part" in Design modeler, but with this all interactions removed and it isn't what I wanted! In other words, I think that I need an advance model of "form new part" ! I know GAMBIT can does this but I want to doing this with ANSYS! Can "ansys meshing and geometry" does something similar to what I explained? thanx |
|
July 22, 2014, 11:51 |
|
#2 |
Super Moderator
Alex
Join Date: Jun 2012
Location: Germany
Posts: 3,399
Rep Power: 46 |
I did not understand completely, but I guess what you really need is to "freeze" the 3 individual parts before you apply "form new part".
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Is it possible to model natural convection in a 2D horizontal model in fluent | caitoc | FLUENT | 1 | May 5, 2014 13:32 |
Mixture model + VOF? | blacksoil2012 | Fluent Multiphase | 2 | February 8, 2014 23:59 |
Problems bout CFD model of biomass gasification, Downdraft gasifier | wanglong | FLUENT | 2 | November 25, 2009 23:27 |
2 stage axial turbine model convergence issues | sherifkadry | CFX | 2 | September 7, 2009 20:51 |
Kato-Launder model | sam | Main CFD Forum | 13 | September 21, 2006 10:15 |