[ICEM] ICEM CFD Problem with the boundary conditions while importing the mesh to fluent -- CFD Online Discussion Forums

September 2, 2014, 12:09	ICEM CFD Problem with the boundary conditions while importing the mesh to fluent	#1
sonic109 New Member Abhinav Pandey Join Date: Aug 2014 Posts: 9 Rep Power: 11	I am having some problem while importing a mesh to fluent from ICEM. After converting the 2D hexa mesh to unstructured mesh when I import it to fluent, somehow the Bocos only include inlet and outlet, and not the walls. I searched for similar threads on this forum and found out the problem is I have associated same edge to two groups of curve ( walls and inlet). But the suggested solutions (like splitting the edge) is not working for me. Is there any other way to solve this problem without further splitting the blocks? Please help me with this. Last edited by sonic109; September 2, 2014 at 17:28.

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Commercial meshers] icem fluent mesh with cyclic boundary condition	jiejie	OpenFOAM Meshing & Mesh Conversion	2	February 24, 2020 03:34
[ICEM] Boundary conditions problem in ICEM and Fluent	Far	ANSYS Meshing & Geometry	6	September 10, 2014 19:48
Inner geometry gets lost exporting mesh from ICEM CFD to CFX-Pre	powpow	CFX	3	December 20, 2012 09:14
[ICEM] Export unstructured periodic mesh from ICEM CFD to Fluent	ivanddd	ANSYS Meshing & Geometry	1	February 3, 2011 00:51
ICEM CFD 5.1 Hex-Tet mesh merging failure	bogesz	CFX	1	January 29, 2005 06:46

All times are GMT -4. The time now is 08:28.