|
[Sponsors] |
[ICEM] Periodic grid for wedge-shaped geom into FLUENT |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 8, 2014, 10:14 |
Periodic grid for wedge-shaped geom into FLUENT
|
#1 |
New Member
Join Date: Mar 2009
Posts: 23
Rep Power: 17 |
Dear all
I try to generate grid for such wedge-shape geometry, solve it in FLUENT. In order to solve it more quickly, 1/6 of the geometry is applied, and periodic zone is used. Define the parts as Define the periodic block as But in FLUENT, I got such error as: > Reading "D:\Test\fluent.msh"... Clearing partially read grid. 9261 nodes. 8000 hexahedral cells, zone 8. 22800 quadrilateral interior faces, zone 9. 400 quadrilateral wall faces, zone 10. 800 quadrilateral wall faces, zone 11. 400 quadrilateral velocity-inlet faces, zone 12. 400 quadrilateral pressure-outlet faces, zone 13. Building... mesh Error: FLUENT received fatal signal (ACCESS_VIOLATION) 1. Note exact events leading to error. 2. Save case/data under new name. 3. Exit program and restart to continue. 4. Report error to your distributor. What is the problem? Thanks |
|
September 8, 2014, 14:51 |
|
#2 |
Senior Member
Sebastian Engel
Join Date: Jun 2011
Location: Germany
Posts: 567
Rep Power: 21 |
After defining the periodicity in the global mesh setup, did you connect the corresponding vertices with perodicity?
When the global Periodicity is set, every vertex in the periodic face needs to be connected to its counterpart in the other periodic face. The program feature can be find in blocking>edit block>periodic vertices |
|
September 10, 2014, 13:11 |
|
#3 | |
New Member
Join Date: Mar 2009
Posts: 23
Rep Power: 17 |
Quote:
|
||
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
periodic boundaries in Fluent | littlelz | FLUENT | 1 | March 25, 2014 05:08 |
[ANSYS Meshing] uniform grid in Fluent | Jim87 | ANSYS Meshing & Geometry | 0 | May 7, 2013 17:00 |
Regarding periodic BC in ICEM generated grid | Tarak | OpenFOAM | 32 | April 30, 2013 14:46 |
[Commercial meshers] Exporting from V grid to fluent, .msh format | Karl SG | OpenFOAM Meshing & Mesh Conversion | 0 | April 14, 2013 23:33 |
[Commercial meshers] fluent patch type periodic not recognised although no periodics are defined | Bando | OpenFOAM Meshing & Mesh Conversion | 4 | December 4, 2012 14:06 |