|
[Sponsors] |
[ICEM] Problem of meshing bundle of wired hollow cylinders |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 9, 2014, 05:59 |
Problem of meshing bundle of wired hollow cylinders
|
#1 |
New Member
Qing FAN
Join Date: Sep 2014
Posts: 3
Rep Power: 11 |
Hello everyone here,
The simulation I want to do is that, there are a bundle of wired hollow pins, and I want to know the velocity and pressure fields around one pin, and maybe thermal field around it later. And I build a hexagonal prism area by using ICEM CFD, the problem is that, when I rebuild the topology, the geometry is ruined. And I have changed the tolerance of build topology, it still doesn't work. If I do not rebuild topology, meshing fails. Could anybody give me some suggestions on rebuilding topology or the simulation? Thanks. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Meshing problem in Formula one | Far | ANSYS Meshing & Geometry | 113 | April 23, 2013 12:36 |
[ICEM] problem with meshing in icem cfd | saurabhjoshi2011 | ANSYS Meshing & Geometry | 13 | March 12, 2013 11:27 |
[ICEM] Tetra meshing problem | Smaras | ANSYS Meshing & Geometry | 4 | February 21, 2013 09:04 |
[ICEM] ICEM meshing problem | xyq102296 | ANSYS Meshing & Geometry | 6 | October 28, 2010 10:09 |
GAMBIT meshing problem | Gauthier Lambert | Main CFD Forum | 1 | August 3, 2000 09:22 |