|
[Sponsors] |
[Workbench] Ansys 15 meshing not working. Please help... |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
September 17, 2014, 08:56 |
Ansys 15 meshing not working. Please help...
|
#1 |
New Member
Join Date: Sep 2014
Posts: 9
Rep Power: 12 |
Hi. I tried everything but I cant make simple CFD task to mesh...
In ansys workbench I created "Mesh" element (see ling below) (mesh error is just because I canceled project refresh because of the same issue) https://www.dropbox.com/s/lho43txhm4ngq6t/mesh.JPG?dl=0 Then in mesh editor window after making all named selections and ect I tried to GENERATE MESH. (see link below) https://www.dropbox.com/s/l72qlhoeuq..._fail.JPG?dl=0 "Ansys Workbench Mesh Status" window show 2 progress bars "Overall Progress..." and "Parallel Meshing..." After some moments my all RAM memory filling up (32 GB) and nothing hapens. The "Overall Progress" and "Prarallel Meshing..." bars do nothing. (waited for more than 2 hours). Please someone can tell what I need to do to get mesh component working ? |
|
September 17, 2014, 10:15 |
|
#2 |
Senior Member
Amin
Join Date: Oct 2013
Location: Germany
Posts: 397
Rep Power: 15 |
hey
I think this happens because your element numbers are too large! (because you're selected "proximity and curvature" and "fine") turn "use advance size function" off and change "relevance center" to coarse and try again! if it's OK try to editing your mesh step by step! |
|
September 18, 2014, 05:48 |
|
#3 |
New Member
Join Date: Sep 2014
Posts: 9
Rep Power: 12 |
Thanks amin.z Problem solved.
It's embarrassing but I forgot to change mm to m and got ultra dense mesh. |
|
Tags |
mesh 2d, mesh and fluent, parallel meshing |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ANSYS Meshing] ANSYS Meshing Graphics autohide | Benedikt | ANSYS Meshing & Geometry | 7 | February 20, 2017 05:26 |
Using ICEM CFD to repair/edit ANSYS Meshing | Kaaji1359 | ANSYS | 2 | July 30, 2013 10:28 |
[ICEM] ICEM sizing function >>> Gambit and Ansys meshing | Far | ANSYS Meshing & Geometry | 6 | March 5, 2013 01:16 |
ANSYS program has stopped working? | chihoangkt | ANSYS | 0 | July 16, 2012 16:41 |
[ANSYS Meshing] Fine meshing in ANSYS Meshing v13 | shk12345 | ANSYS Meshing & Geometry | 1 | December 1, 2011 10:41 |