|
[Sponsors] |
June 9, 2015, 12:20 |
Surface mesh
|
#1 |
New Member
Hyowon Lee
Join Date: Feb 2013
Location: Ulsan, South Korea
Posts: 11
Rep Power: 13 |
Good morning, ICEM experts.
When meshing a circle surface on a cylinder, Is there any way to make mesh on the basis of central axis? Also, the mesh should be filled with hexahedrons only except 10 triangular prism around the central axis. ICEMers can easily understand it if you see some pictures on the link. Pictures is added in my dropbox link as below. https://www.dropbox.com/sh/dsdgyzm4p...qobBHxsMa?dl=0 Thank you. Sincerely. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Gmsh] Error : Self intersecting surface mesh, computing intersections & Error : Impossible | velan | OpenFOAM Meshing & Mesh Conversion | 3 | October 22, 2015 11:05 |
[snappyHexMesh] No layers in a small gap | bobburnquist | OpenFOAM Meshing & Mesh Conversion | 6 | August 26, 2015 09:38 |
[snappyHexMesh] SnappyHexMesh no layers and no decent mesh for complex geometry | pizzaspinate | OpenFOAM Meshing & Mesh Conversion | 1 | February 25, 2015 07:05 |
[snappyHexMesh] Problem with Sanpper, surface still Rough | Zephiro88 | OpenFOAM Meshing & Mesh Conversion | 7 | November 5, 2014 12:05 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |