[keyhan]

hi,when i want to mesh my impeller,i see this error,can you help me?
error:unable to open the specified geometry in designmodeler,possibly due to the third party features.

[-Maxim-]

there are more warnings... something about Hub region.. maybe fix that first?

[saeidghouli]

Originally Posted by keyhan

hi,when i want to mesh my impeller,i see this error,can you help me?
error:unable to open the specified geometry in designmodeler,possibly due to the third party features.

Dear Keyhan
I faced the same problem a week ago and I explained it to a friend.... His answer solved the issue for me..... Here you are with the procedure:
Open Start menu>>All Programs>>Ansys 15.0 (or 16.0, etc.) folder>>User License Preferences 15.0 (or 16.0, etc).
In the opened window, go to Geometry tab. Then click on Ansys BladeModeller and hit Move up button. Check the number beside Ansys BladeModeller to be "1".
Finally click on Apply and close the windows.
Enjoy!

[patrycy]

Originally Posted by saeidghouli

Dear Keyhan
I faced the same problem a week ago and I explained it to a friend.... His answer solved the issue for me..... Here you are with the procedure:
Open Start menu>>All Programs>>Ansys 15.0 (or 16.0, etc.) folder>>User License Preferences 15.0 (or 16.0, etc).
In the opened window, go to Geometry tab. Then click on Ansys BladeModeller and hit Move up button. Check the number beside Ansys BladeModeller to be "1".
Finally click on Apply and close the windows.
Enjoy!

Dear Mr./Mrs.

I would like to thank you for solving my one-year problem.

God bless You,
Kind regards
Patrycy

[saeidghouli]

Originally Posted by patrycy

Dear Mr./Mrs.

I would like to thank you for solving my one-year problem.

God bless You,
Kind regards
Patrycy

Dear Patracy
You're welcome! Solving one's issue would feel better than any thing for me.... That's it.

[dj1372]

Originally Posted by saeidghouli

Dear Keyhan
I faced the same problem a week ago and I explained it to a friend.... His answer solved the issue for me..... Here you are with the procedure:
Open Start menu>>All Programs>>Ansys 15.0 (or 16.0, etc.) folder>>User License Preferences 15.0 (or 16.0, etc).
In the opened window, go to Geometry tab. Then click on Ansys BladeModeller and hit Move up button. Check the number beside Ansys BladeModeller to be "1".
Finally click on Apply and close the windows.
Enjoy!

really really thank you .

[saeidghouli]

Originally Posted by dj1372

really really thank you .

You're welcome!

Saeid Ghouli
سعيد قولي

[Rikki-Tikki-Tavi]

Originally Posted by saeidghouli

Dear Keyhan
I faced the same problem a week ago and I explained it to a friend.... His answer solved the issue for me..... Here you are with the procedure:
Open Start menu>>All Programs>>Ansys 15.0 (or 16.0, etc.) folder>>User License Preferences 15.0 (or 16.0, etc).
In the opened window, go to Geometry tab. Then click on Ansys BladeModeller and hit Move up button. Check the number beside Ansys BladeModeller to be "1".
Finally click on Apply and close the windows.
Enjoy!

Here in 2021 (2020 R2), still solved my problem. Thank you for taking the time.