|
[Sponsors] |
[DesignModeler] Problem with modeling of gas combustion in room |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
October 16, 2015, 06:15 |
Problem with modeling of gas combustion in room
|
#1 |
New Member
Join Date: Oct 2015
Posts: 1
Rep Power: 0 |
Hi everyone,
I am begginer in DM. I am trying to create combustion of gas in room. But i have problem with creating the domain. Because I need to create room with burnner inside located on the center of the room (box) with fuel (gas). But i dont know how to create the walls were solid, the space inside was created as a flow and the burner inside was solid and fuel was flow too. Thank you for the aswer Kara |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Combustion Modeling with COMSOL | davidst | COMSOL | 0 | January 11, 2013 12:39 |
combustion chamber problem | mcnair | ANSYS Meshing & Geometry | 0 | March 16, 2011 12:41 |
gas through porous media problem | jiguozhao | CFX | 2 | February 25, 2011 02:14 |
HVAC Modeling Humans in Room | LilBort | CFX | 27 | July 31, 2009 11:08 |
source term in a gas mixture problem | Kevin | Siemens | 0 | March 27, 2008 05:55 |