[ICEM] Meshing/Blocking a sieve tray of a distillation column

Vdelmonego · January 22, 2015, 10:53

Hello everyone!

Well, i'm new here and in the CFD tchniques. I'm working on a project for my university and still learning ANSYS software. One of the stages of my research is doing the numerical mesh of the sieve tray, so we can run this on FLUENT. But i'm really confuse how to start the blocking, and the geometry is already done\P
So, if somebody has an ideia how to start or know how to do it, i would be very grateful if sharing with me!

Thanks.

Jianbiao Shen · February 23, 2016, 03:23

Hello, I have the same question, have you figured out how to mesh the sieve tray? Thanks a lot.

February 23, 2016, 03:23		#2
Jianbiao Shen New Member Shen Jianbiao Join Date: Mar 2014 Posts: 2 Rep Power: 0	Hello, I have the same question, have you figured out how to mesh the sieve tray? Thanks a lot. alip67 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[General] 2 datas on one plot	Akuji	ParaView	46	December 1, 2013 14:06
mesh generation for reactive distillation tray	Adila Anbreen	ANSYS Meshing & Geometry	2	June 3, 2013 12:52
Can evaporation-condensation model used to simulate distillation column?	Bin	ANSYS	0	May 23, 2013 07:53
liquid flow in distillation sieve tray	alven299	FLUENT	0	July 4, 2009 04:13
Sieve Tray Hydraulics,..I'm stuck,	romi	FLUENT	1	June 19, 2007 07:11