|
[Sponsors] |
[ANSYS Meshing] Pedestrian level wind simulation |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 8, 2016, 20:59 |
Pedestrian level wind simulation
|
#1 |
New Member
hemant mittal
Join Date: Feb 2016
Posts: 21
Rep Power: 10 |
how to simulate air flow around urban environment at pedestrian level, my point is how to use google earth data for meshing around urban environment
|
|
March 9, 2016, 06:17 |
|
#2 | |
New Member
Harry Eggo
Join Date: Feb 2016
Posts: 10
Rep Power: 10 |
Quote:
Hope that helps EDIT: I'd also advise that you do a literature review and try to properly understand what you are trying to do. Jumping into software is tempting but you've got to have a very good idea of what you are doing or else you could waste a bit of time and produce data that you don't really understand yourself. Last edited by harry94; March 9, 2016 at 06:19. Reason: extra info |
||
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[snappyHexMesh] meshing of very small patches in comparison with the overall geometry | christos | OpenFOAM Meshing & Mesh Conversion | 3 | December 17, 2014 16:55 |
[snappyHexMesh] Adding layers goes wrong with SnappyHexMesh | Elise | OpenFOAM Meshing & Mesh Conversion | 1 | April 22, 2013 02:32 |
shaft power versus RMP curve in wind turbine simulation | zhenduan306 | CFX | 28 | November 8, 2012 10:11 |
[snappyHexMesh] Boundary layer in a pipe | Clementhuon | OpenFOAM Meshing & Mesh Conversion | 6 | March 12, 2012 12:41 |
3D simulation of wind turbine in Yaw wind(in a lateral wind) | mohammad | Main CFD Forum | 0 | December 28, 2010 03:26 |