Problem with Identical replacement face

ngoc_tran_bao · March 9, 2016, 23:48

Hi all my friends, I am a new user of DesignModeler in Ansys Workbench. My project is related to centrifugal pump, I have a original step file of pump geometry, unfortunately it contains several tiny faces. I try to delete all of them to make meshing step easier. However, there is only one face left, when I delete it the software creates automatically another face at right there with the notification 'Identical replacement face'. I do not know how to fix this problem. Can you help me in this case. Thank you so much.

ghorrocks · March 10, 2016, 04:27

This post has been moved to the geometry and meshing forum. Please use the correct forum in future for your question.

March 9, 2016, 23:48	Problem with Identical replacement face	#1
ngoc_tran_bao Member ngoc tran bao Join Date: Jan 2016 Posts: 35 Rep Power: 10	Hi all my friends, I am a new user of DesignModeler in Ansys Workbench. My project is related to centrifugal pump, I have a original step file of pump geometry, unfortunately it contains several tiny faces. I try to delete all of them to make meshing step easier. However, there is only one face left, when I delete it the software creates automatically another face at right there with the notification 'Identical replacement face'. I do not know how to fix this problem. Can you help me in this case. Thank you so much. Last edited by ngoc_tran_bao; March 10, 2016 at 02:25.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
area does not match neighbour by ... % -- possible face ordering problem	St.Pacholak	OpenFOAM	10	February 7, 2024 21:50
[blockMesh] Errors during blockMesh meshing	Madeleine P. Vincent	OpenFOAM Meshing & Mesh Conversion	51	May 30, 2016 10:51
Problem with cyclic boundaries in Openfoam 1.5	fs82	OpenFOAM	36	January 7, 2015 00:31
chtMultiRegionSimpeFoam internal face problem	guserik	OpenFOAM Running, Solving & CFD	4	November 8, 2013 07:26
[blockMesh] Axisymmetrical mesh	Rasmus Gjesing (Gjesing)	OpenFOAM Meshing & Mesh Conversion	10	April 2, 2007 14:00

March 10, 2016, 04:27		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,703 Rep Power: 143	This post has been moved to the geometry and meshing forum. Please use the correct forum in future for your question.