|
[Sponsors] |
July 28, 2017, 02:00 |
mesh in overlapped surfaces
|
#1 |
New Member
Join Date: May 2015
Posts: 11
Rep Power: 10 |
Hi
I have recently worked on the model below, but I have problem in meshing part. I though you could help me about this. according to attached pictures I have some overlapped surfaces in my model, in which mesh does not form. despite I removed the underneath surfaces, I still have this problem. could you please help me to solve this problem?? thank you in advance |
|
July 29, 2017, 02:00 |
|
#2 |
New Member
Andrew
Join Date: Jul 2017
Posts: 4
Rep Power: 8 |
the mesh will generate in watertight space, I thick your geometry have more than one watertight space. Maybe try assign each space a domain name by "Create body"
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
y+ = 1 boundary layer mesh with snappyHexMesh | Arzed23 | OpenFOAM Running, Solving & CFD | 6 | November 23, 2022 15:15 |
[snappyHexMesh] Disturbance in the mesh after the addition of layers | Dorian1504 | OpenFOAM Meshing & Mesh Conversion | 0 | June 13, 2017 02:27 |
how to extend FSI 2D codes to 3D, need advises | abouziar | Main CFD Forum | 1 | May 30, 2008 04:08 |
Convergence moving mesh | lr103476 | OpenFOAM Running, Solving & CFD | 30 | November 19, 2007 14:09 |
Icemcfd 11: Loss of mesh from surface mesh option? | Joe | CFX | 2 | March 26, 2007 18:10 |