CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] meshing alternate wedge

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 3, 2017, 01:29
Default meshing alternate wedge
  #1
Member
 
ARAVIND SRIDHARA
Join Date: Jan 2017
Posts: 32
Rep Power: 8
aravind vashista is on a distinguished road
Hii all,
i want to mesh the geometry shown in fig. i use icem to create structured mesh using blockin. I am able to create y grid at the tip of the wedge. I am unable to produce good mesh in the channel (cavity or opening). please give me some tips or help me in meshing this geometry.


surface.jpg
aravind vashista is offline   Reply With Quote

Old   November 3, 2017, 14:35
Default
  #2
Member
 
ARAVIND SRIDHARA
Join Date: Jan 2017
Posts: 32
Rep Power: 8
aravind vashista is on a distinguished road
Quote:
Originally Posted by aravind vashista View Post
Hii all,
i want to mesh the geometry shown in fig. i use icem to create structured mesh using blockin. I am able to create y grid at the tip of the wedge. I am unable to produce good mesh in the channel (cavity or opening). please give me some tips or help me in meshing this geometry.


Attachment 59323
i have created blocks seperately for internal wall ( shown in blue) and channel ( shown in green). The internal wall is solid and fluid flows in the channel portion. I am having problem in associating edge to curve at the intersection of 2 blocks of channel. This can be understood from the iso and side view of the curve and blocks fig shown. Can someone please help me in solving this issue.

b.jpg

int surface.jpg

cb.jpg

cb side.jpg
aravind vashista is offline   Reply With Quote

Reply

Tags
blocking strategy, icem, icem 17, mesh, wedges

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[Other] Wedge patch '*' is not planar LilumDaru OpenFOAM Meshing & Mesh Conversion 6 January 12, 2021 06:55
[SOLVED] sprayFoam - Hitting a wedge patch should not be possible Malikos OpenFOAM Running, Solving & CFD 1 March 10, 2016 13:03
[blockMesh] Problems meshing wedge type blocks Alan OpenFOAM Meshing & Mesh Conversion 0 July 27, 2009 21:05
Best Meshing scheme for Cylinder Nutrex Main CFD Forum 4 July 29, 2008 12:03
Volume Meshing & Face Meshing? singularity of grid ken FLUENT 0 September 4, 2003 12:08


All times are GMT -4. The time now is 21:02.