CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > ANSYS Meshing & Geometry

[ANSYS Meshing] Ansys meshing does not respond when it is opened after the first time

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 16, 2018, 09:08
Default Ansys meshing does not respond when it is opened after the first time
  #1
New Member
 
Mikhail O.
Join Date: Feb 2018
Posts: 2
Rep Power: 0
MikhO is on a distinguished road
Hello everyone.

I have the problem with Ansys Meshing tool.

I am using Ansys 19.0 under Linux (OpenSuse), Academic License.

If I do a project from scratch, I can use all tools on each step without any problems: DesignModeler, Meshing, etc.

The project can be related to Ansys Fluent or Ansys Mechanical (other tools have not been tested yet).

But if I have opened the Meshing tool, done something (and closed), I cannot open it again for some reason.
That means that it is opened but inactive and does not respond.
The only one known way is to kill the application and never open the Meshing tool for the current tool.

Does anyone had similar problems?

I would like to know whether this problem is related to the License, to the Linux, or to the Ansys itself.

I worked with other versions of Ansys on different machines and clusters and did not face this problem.

I attach the screenshot with the state when the Meshing tool can be opened (the first time of the use).

Thank you.

Best regards,
Mikhail
Attached Images
File Type: jpg ansys_mesh_problem.jpg (75.2 KB, 7 views)
MikhO is offline   Reply With Quote

Reply

Tags
ansys meshing problem

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[General] Extracting ParaView Data into Python Arrays Jeffzda ParaView 29 January 18, 2023 08:37
Star cd es-ice solver error ernarasimman STAR-CD 2 September 12, 2014 01:01
Micro Scale Pore, icoFoam gooya_kabir OpenFOAM Running, Solving & CFD 2 November 2, 2013 14:58
How to write k and epsilon before the abnormal end xiuying OpenFOAM Running, Solving & CFD 8 August 27, 2013 16:33
pisoFoam with k-epsilon turb blows up - Some questions Heroic OpenFOAM Running, Solving & CFD 26 December 17, 2012 04:34


All times are GMT -4. The time now is 18:56.