|
[Sponsors] |
July 25, 2019, 14:00 |
2D geometry, surfaces doubt
|
#1 |
New Member
Victor Ameno Cautela
Join Date: Jul 2019
Location: Rio de Janeiro
Posts: 13
Rep Power: 6 |
Hello to all!
Im a new user of cfd-forum and also a new user of Ansys. Im currently working with Ansys Student 2019-R2 I'm trying to simulate a sudge tank cleaning and having problems with adding some surfaces.. First I divided the tank area and create two different surfaces for adding sludge and air in the materials then, I draw a vertical pipe(in the same sketch) for the sludge draining, but I canīt create a surface as the error shows.. I Attached some pictures for better visualization. I apologize for my bad english and for the so basic question, but I'm having trouble to solve this geometry.. Thank you guys! |
|
July 28, 2019, 04:54 |
|
#2 |
New Member
M.Eid
Join Date: Apr 2018
Posts: 27
Rep Power: 8 |
Hello,
Are you using the Add Material option in the Operation tab? |
|
July 29, 2019, 09:58 |
|
#3 |
New Member
Victor Ameno Cautela
Join Date: Jul 2019
Location: Rio de Janeiro
Posts: 13
Rep Power: 6 |
Hello,
I am Still in the geometry process, the question is, the edges that compose the pipe for suction have a dark green color and I cannot define any surface. The Materials definition goes on the fluent solver, isn't it? Im still on Design Modeler Thanks for the reply! |
|
July 30, 2019, 02:52 |
|
#4 |
New Member
M.Eid
Join Date: Apr 2018
Posts: 27
Rep Power: 8 |
To generate surfaces you use a feature called Surface from Sketch in Design Modeler.
In this feature you have to input add material or add frozen If you are using the add material change it to add frozen and your problem should be solved. |
|
July 30, 2019, 09:12 |
|
#5 |
New Member
Victor Ameno Cautela
Join Date: Jul 2019
Location: Rio de Janeiro
Posts: 13
Rep Power: 6 |
Hello to all!
Guys, Thank you very much for your interest in help me with my question. That's it, Now I can mesh these two parts separately with the ADD FROZEN option. Some pictures attached for better visualization of the process |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[Workbench] Workbench 18.2 SpaceClaim->Mechanical geometry accuracy/tolerance problem | sultzan | ANSYS Meshing & Geometry | 0 | December 13, 2018 17:41 |
[snappyHexMesh] SnappyHexMesh no layers and no decent mesh for complex geometry | pizzaspinate | OpenFOAM Meshing & Mesh Conversion | 1 | February 25, 2015 07:05 |
[ICEM] Issue creating geometry and trim surfaces | M4x1m | ANSYS Meshing & Geometry | 1 | February 9, 2015 08:38 |
[ICEM] Cleaning Rippled Surfaces in ICEM | scribby182 | ANSYS Meshing & Geometry | 3 | December 11, 2012 16:34 |
vitual _ real | deneb | FLUENT | 3 | January 22, 2007 04:31 |