[DesignModeler] Boolean Subtract produces improper feature, defeatures it

Satz · May 3, 2021, 14:40

Greetings,

I am working on Vertical Axis Wind turbine.
I have designed turbine blade(planar surface geometry) in Solidworks and imported it into DesignModeler. Later I created a circular domain around it (made it into surface) and used Boolean operation subtract. But the outcome of the Boolean operation is not proper. I am not able to get the desired surface as the geometry gets distorted during boolean. Airfoil curve is not the same after Boolean subtract.

How to do boolean subtract without loss of geometry feature?

Capture.JPG
With preserve tool body enabled

Capture2.JPG
Airfoil surface is not proper after boolean

Thank You.

evcelica · May 4, 2021, 21:14

That could just be graphical.
What does it look like after meshing?

Satz · May 5, 2021, 07:02

@evcelica Thank you and I have fixed it by changing the facet value.

But I am facing problem during meshing process. In design modeler the airfoil curve looks fine (first figure) with length 0.082326 m. But after opening the meshing window, the same airfoil curve gets modified(blue dashed line) somehow as shown in the second figure. The length also got changed to 0.082324 m. Due to this I am unable to apply edge sizing and inflation properly. Please suggest me a solution.

Capture14.PNG
In design Modeler

Capture15.PNG
In fluent meshing

evcelica · May 5, 2021, 17:14

Perhaps a smaller mesh size in that region?
The mesher is going to defeature the geometry according to the mesh size.
Sorry, I'm not an expert at this stuff.

May 3, 2021, 14:40	Boolean Subtract produces improper feature, defeatures it	#1
Satz New Member Sathish Join Date: Nov 2020 Location: Land of diverse Posts: 5 Rep Power: 5	Greetings, I am working on Vertical Axis Wind turbine. I have designed turbine blade(planar surface geometry) in Solidworks and imported it into DesignModeler. Later I created a circular domain around it (made it into surface) and used Boolean operation subtract. But the outcome of the Boolean operation is not proper. I am not able to get the desired surface as the geometry gets distorted during boolean. Airfoil curve is not the same after Boolean subtract. How to do boolean subtract without loss of geometry feature? Capture.JPG With preserve tool body enabled Capture2.JPG Airfoil surface is not proper after boolean Thank You. Last edited by Satz; May 3, 2021 at 14:44. Reason: attach more image

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[snappyHexMesh] Error snappyhexmesh - Multiple outside loops	avinashjagdale	OpenFOAM Meshing & Mesh Conversion	53	March 8, 2019 09:42
[DesignModeler] Problem with Boolean Subtract	collie	ANSYS Meshing & Geometry	0	December 10, 2018 05:42
Error with boolean subtract in Design Modeler	mattK	FLUENT	6	March 12, 2018 10:23
[snappyHexMesh] How to define to right point for locationInMesh	Mirage12	OpenFOAM Meshing & Mesh Conversion	7	March 13, 2016 14:07
Info message -> Fluent does not start	Jenson	FLUENT	0	December 22, 2011 17:21

May 4, 2021, 21:14		#2
evcelica Senior Member Erik Join Date: Feb 2011 Location: Earth (Land portion) Posts: 1,167 Rep Power: 23	That could just be graphical. What does it look like after meshing?

May 5, 2021, 07:02		#3
Satz New Member Sathish Join Date: Nov 2020 Location: Land of diverse Posts: 5 Rep Power: 5	@evcelica Thank you and I have fixed it by changing the facet value. But I am facing problem during meshing process. In design modeler the airfoil curve looks fine (first figure) with length 0.082326 m. But after opening the meshing window, the same airfoil curve gets modified(blue dashed line) somehow as shown in the second figure. The length also got changed to 0.082324 m. Due to this I am unable to apply edge sizing and inflation properly. Please suggest me a solution. Capture14.PNG In design Modeler Capture15.PNG In fluent meshing

May 5, 2021, 17:14		#4
evcelica Senior Member Erik Join Date: Feb 2011 Location: Earth (Land portion) Posts: 1,167 Rep Power: 23	Perhaps a smaller mesh size in that region? The mesher is going to defeature the geometry according to the mesh size. Sorry, I'm not an expert at this stuff.