|
[Sponsors] |
February 3, 2010, 01:48 |
Need Help
|
#1 |
New Member
Hadi
Join Date: May 2009
Posts: 7
Rep Power: 17 |
Hi, I am working with GAMBIT & FLUENT. I'd like to anlysis a fin-tube in heat transfer. I use Tri/Pave model for mesh in front and back sides in inner part and then use cooper mesh for volume mesh. When I gird check in FLUENT it has 2 errors and I don't understand the meaning of them:
1-outflow zone 6 has two adjacent cell zones. 2-mass-flow-inlet zone 8 has two adjacent cell zones and because of these two reasons Grid check will fail. Whould you please help me to know these 2 errors and how I can remove them. Thanks |
|
February 4, 2010, 00:52 |
|
#2 |
Super Moderator
Maxime Perelli
Join Date: Mar 2009
Location: Switzerland
Posts: 3,297
Rep Power: 41 |
post a picture of your geometry in the neighborhood from your inlet and outler.
__________________
In memory of my friend Hervé: CFD engineer & freerider |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|