|
[Sponsors] |
March 5, 2010, 20:51 |
Geometry ignored on symmetry plane
|
#1 |
New Member
Kai
Join Date: Mar 2010
Posts: 1
Rep Power: 0 |
Hi everyone,
I am trying to mesh a simple 3d wing half model with a symmetry plane. Octree works but Fluent does not seem to like the mesh... Thus I am trying to use the patch dependent mesher. Works fine on the wing but when I mesh the symmetry plane the mesh is strangely distorted and ignores the geometry at the leading and trailing edges ( see pics). I believe I have tried all options and also attached curve setting to the contact curve. Nothing changes the behaviour. I can't attach the files because of size but will send them out if somebody could have a look. It's probably something simple but I am out of ideas... The same geometry work fine in CFX mesh but the control there is so limited. I also tried several import formats including the original Solidworks file. Thanks for any advice. Kai |
|
Tags |
geometry, icem, unstructured mesh |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Poor Residuals at Intersection Between Symmetry Plane and Airfoil Leading Edge | TWaung | CFX | 2 | February 16, 2010 08:11 |
Symmetry plane help! (with schematic) | Nate | Siemens | 1 | October 11, 2007 10:46 |
Symmetry plane error in solver | Santiago Orrego. | CFX | 6 | January 31, 2007 07:09 |
ICEM and symmetry plane | Roland | CFX | 3 | September 13, 2006 08:38 |
Mixing plane geometry definition | Hbet | FLUENT | 0 | January 18, 2002 07:16 |