Threads Tagged with geometry

[ANSYS Meshing] Can we script the geometry and the mesh in ANSYS?

Help with repairing geometry

[Gmsh] Curved edged (etched) & Externally wetted and porous emitter

Cannot import Geometry into Fluent Meshing 2019 R1

Parts "cut-off" with a plane

[Other] Importing GIS CAD file into ANSYS

[GAMBIT] Error meshing with mechanical

Dynamic Ground Effect Simulations

How to get full data in reference frames

[TurboGrid] Examine coordinate points of balde tip surface

Not able to change the 'type' in boundary condition

Create mesh for 1D geometry

Extension of geometry after simulation

Mesh: faces with no faces

CFD: Pressure loss over an engine valve

Converting .msh file back to geometry

[ANSYS Meshing] Error in Mesh of Pelton turbine

[ANSYS Meshing] How to mark the different parts with different color?

[ICEM] Holes in complex ICEM geometry

[Workbench] Importing Geometry Issue

ratio of catalytic to geometry surface area

[DesignModeler] Different Types of Surface Body

Which one is a correct smallest geometry unit?

CAD for shape optimsiation.

[ANSYS Meshing] Advice for meshing a complex boolean domain

[DesignModeler] Problem with Boolean Subtract

[Other] Meshfile too large

Salome - Geometry

[DesignModeler] Need some help for Modeling for CFD Analysis

[DesignModeler] Need some help for CFD Modeling

Get geometry dimensions from a FLUENT case

[DesignModeler] How to change the chord length of an airfoil in ansys geometry?

[DesignModeler] How to extrude and scale at the same time?

Geometry not visible in Fluent solution setup

Geometry of porous medium

Modeling Propeller Geometry in STAR CCM+ 3D-CAD

Problem with geometry

Initialize flow from different geometry

Geometry simplification

[General] Save cell data with information about the geometry of each cell