|
[Sponsors] |
October 31, 2011, 12:42 |
Unstructured 3d blade grid
|
#1 |
New Member
Papis
Join Date: Dec 2010
Posts: 25
Rep Power: 15 |
Hi all,
I am trying to make an unstructured tetrahedron mesh of a rotating blade. The problem I need to simulate is the Caradonna rotor which is a 2 bladed helicopter rotor. As you can see from the pictured below i have generated an mesh with periodic boundaries.My main problem is the generation of grid ON the blade As you can see the surface mesh doesn't actually fits the surface of the blade(Not all nodes of boundary faces are on the airfoil surface) which of course is problematic. At first I thought it might be resolution but when doing hexagonal grids(with blocking for example) the surface is fitted very nicely even at low resolutions. If anyone could point me to the right direction to understand this issue I would be grateful. [IMG]file:///home/papis/Desktop/screen1.jpg[/IMG] [IMG]file:///home/papis/Desktop/screen2.jpg[/IMG] P.S. I have created only one body (the region between the blade and the outer boundary,since i do not need grid inside the blade) Thanks a lot |
|
November 1, 2011, 06:18 |
|
#2 |
New Member
Papis
Join Date: Dec 2010
Posts: 25
Rep Power: 15 |
Is it possible that surface meshes should be generated first?
|
|
November 1, 2011, 11:54 |
|
#3 |
Member
Join Date: Apr 2009
Location: Czech Republic
Posts: 65
Rep Power: 18 |
Try decrease "Edge criterion" parameters from 0.2 to 0.005 (Global Mesh Parameters > Volume Meshing (Octree) ) and/or try to use "Thin Cuts".
|
|
November 1, 2011, 13:08 |
|
#4 |
New Member
Papis
Join Date: Dec 2010
Posts: 25
Rep Power: 15 |
Yeap this improved things.Thanks a lot for you help.I read the help about the edge criterion option and it wrote " value 0.2 is adequate for most cases.".This is very misleading since 0.2 can't prescribe the surface of naca0012 blade.
Anyway's Thank a lot for your reply Ludvik |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Help! Validity of unstructured grid on S809 airfoil | didiean | FLUENT | 11 | April 3, 2011 02:10 |
2D unstructured Grid | prapanj | Main CFD Forum | 4 | March 15, 2008 17:01 |
unstructured mesh grid independence for Fluent | Shane Schouten | FLUENT | 0 | October 11, 2006 16:50 |
to Identify unstructured grid and structrued grid | harry | Main CFD Forum | 4 | February 17, 2006 02:10 |
Combustion Convergence problems | Art Stretton | Phoenics | 5 | April 2, 2002 05:59 |