|
[Sponsors] |
February 17, 2012, 07:14 |
Help with mesh
|
#1 |
New Member
Join Date: Oct 2011
Posts: 14
Rep Power: 14 |
Could someone please tell me why my mesh is not uniformly on the blocks? I attached the blocking picture and how the mesh looks like... There seems to be something about the blocking strategy I have not understood....
Last edited by cfddwarf; February 17, 2012 at 11:52. |
|
February 17, 2012, 08:44 |
|
#2 |
Member
Michal
Join Date: Mar 2009
Posts: 38
Rep Power: 19 |
In my opinion this is problem with association. You can show edge association by clicking LMB on edges in blocking in the tree and choosing show association.
|
|
February 17, 2012, 08:47 |
|
#3 |
New Member
Join Date: Oct 2011
Posts: 14
Rep Power: 14 |
thanks for your answer. Ive tried that, but the association seems fine to me...all the edges are associated to the curves underneath.
|
|
February 17, 2012, 09:13 |
|
#5 |
Super Moderator
|
This is the association problem. some times this problem is caused due to dissimilar shape of edges as compared to curves and edges try to project to adjacent curves and surfaces.
Attach tin and blocking files |
|
February 17, 2012, 09:13 |
|
#6 |
Member
Michal
Join Date: Mar 2009
Posts: 38
Rep Power: 19 |
And did you check face association? Try associate faces marked on picture.
|
|
February 17, 2012, 10:47 |
|
#7 |
New Member
Join Date: Oct 2011
Posts: 14
Rep Power: 14 |
hey
thanks a lot for your answers, Iam not sure of how to check the face association.. quite new to Icem,... OK: I associated all the faces one by one, and it works now! Sorry for spamming, thanks for the answers! Last edited by cfddwarf; February 17, 2012 at 11:53. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] surface mesh merging problem | everest | ANSYS Meshing & Geometry | 44 | April 14, 2016 06:41 |
[ICEM] Problem making structural mesh on a surface | froztbear | ANSYS Meshing & Geometry | 1 | November 10, 2011 08:52 |
[snappyHexMesh] snappyHexMesh won't work - zeros everywhere! | sc298 | OpenFOAM Meshing & Mesh Conversion | 2 | March 27, 2011 21:11 |
Meshing aifoil in ICEM | student123a | ANSYS Meshing & Geometry | 13 | December 8, 2010 10:40 |
2d irregular grid | Remy | Main CFD Forum | 1 | December 22, 2008 04:49 |