[upendra rajak]

I am want PhD work on IC engine (SI engine) analysis.

I am quite new to Fluent. I did some basic things using mixing of fluids etc.

But I can't get any for mixing to fuel or more tutorials for IC engine combustion etc.
I want to analyze The flow and combustion in IC engine using different new fuel.

Can anyone help me with above. anyone have some good tutorial for this?
Thanks.
upendrarajak86@gmail.com

[pramodtiwari9594]

Originally Posted by mohi

hi
also i need the file demo_eng.x_t and lift.prof for ansys 14.5

I also need same..
forward to
pramodtiwari9594@outlook.com

Thanks

[kurtii]

hi everyone,
1.Cold Flow Simulation:- files (demo_eng.x_t and lift.prof)

2.Port Flow Simulation:- file (tut_port.x_t)

3.Combustion Simulation for a Sector:- files (tut_comb_sect.x_t, injection-profile, Diesel_1comp_35sp_chem.inp, and Diesel_1comp_35sp_therm.dat)

4.Gasoline Direct Injection Engine Simulation:- files (tut_gdi_comb.x_t, comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv)

can someone send to me this folders?
kurtuluspolat01@gmail.com

[605021105]

hi everyone,

1.Cold Flow Simulation:- files (demo_eng.x_t and lift.prof)(it can be download)

2.Port Flow Simulation:- file (tut_port.x_t)(it can be download)

3.Combustion Simulation for a Sector:- files (tut_comb_sect.x_t, injection-profile, Diesel_1comp_35sp_chem.inp, and Diesel_1comp_35sp_therm.dat)

this case can't not download both of following
( Diesel_1comp_35sp_chem.inp, and Diesel_1comp_35sp_therm.dat)

did anyone had it ? if you had please upload...


4.Gasoline Direct Injection Engine Simulation:- files (tut_gdi_comb.x_t, comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv)

this case can't not download following
( footprint.txt, massflowrate.csv, and velocity-0.7cd.csv)
did anyone had it ? if you had please upload...


can someone send to me ? thanks

m10411030@yuntech.org.tw

[ahmedovo]

Hi guys

I have real problem with IC engine (forte) 18.1 . In geometry step when I click on Generate appear this error ((Symmetry direction is not correct .Symmetry plane should aligned with x-z plane , the geometry should lie in the y-positive half space)). Any one can help me please ???

[Sabari Ganesh]

Please send me the files, demo_eng.x_t and lift.prof

sabariganesh304@gmail.com

[arashfluid]

Please send me the tut_port.x_t file.
arashmd538@gmail.com

[Phantomz]

Originally Posted by alienge

thank you but this WinRAR need password. what is the password please?

can u please sent me the file please it is not available

bibhubjohn@gmail.com

[Phantomz]

Originally Posted by Vania

Hi

Download link of Tutorials
http://cfd-offline.com/solving-a-com...-for-a-sector/

cfd-offline is not active please sent me that files in bibhubjohn@gmail.com
please sent me a winrar file

[olalekan1986]

Originally Posted by kurtii

hi everyone,
1.Cold Flow Simulation:- files (demo_eng.x_t and lift.prof)

2.Port Flow Simulation:- file (tut_port.x_t)

3.Combustion Simulation for a Sector:- files (tut_comb_sect.x_t, injection-profile, Diesel_1comp_35sp_chem.inp, and Diesel_1comp_35sp_therm.dat)

4.Gasoline Direct Injection Engine Simulation:- files (tut_gdi_comb.x_t, comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv)

Please can someone send to me this folders?

My email: lekansbox1@gmail.com

I will greatly appreciate your kind gesture

[ahmedovo]

any one want the geometry "demo_eng.x_t " contatc me on ahmed.abbood@gmail.com


regards

[upendra rajak]

Hi every one please help me.................
how to fuel properties change for diesel engine other than fluent data base.
like biodiesel............any suggestion me and send me demo file
upendrarajak86@gmail.com

[sanjaysajeevan]

excuse me, do you have those files now with you?

[sanjaysajeevan]

excuse me, the link is not working.

[putragusmahamdana]

Originally Posted by patel23

hi

i have Ansys 15.0 and i have ANSYS Internal Combustion Engines Tutorial
Guide in Workbench.pdf , in which consist of 4 different examples ..... and but i dot have the related files to perform these simulation

1.Cold Flow Simulation:- files (demo_eng.x_t and lift.prof)

2.Port Flow Simulation:- file (tut_port.x_t)

3.Combustion Simulation for a Sector:- files (tut_comb_sect.x_t, injection-profile, Diesel_1comp_35sp_chem.inp, and Diesel_1comp_35sp_therm.dat)

4.Gasoline Direct Injection Engine Simulation:- files (tut_gdi_comb.x_t, comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv)

Please if any body does have this file can you send me the links or mail me at patelmech58@gmail.com

Hi. Please help me. I need this tutorials too, for my assignment. Thank you.
my email putragusmahamdana@yahoo.com.

[saliha blk]

Originally Posted by patel23

hi

i have Ansys 15.0 and i have ANSYS Internal Combustion Engines Tutorial
Guide in Workbench.pdf , in which consist of 4 different examples ..... and but i dot have the related files to perform these simulation

1.Cold Flow Simulation:- files (demo_eng.x_t and lift.prof)

2.Port Flow Simulation:- file (tut_port.x_t)

3.Combustion Simulation for a Sector:- files (tut_comb_sect.x_t, injection-profile, Diesel_1comp_35sp_chem.inp, and Diesel_1comp_35sp_therm.dat)

4.Gasoline Direct Injection Engine Simulation:- files (tut_gdi_comb.x_t, comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv)

Please if any body does have this file can you send me the links or mail me at patelmech58@gmail.com

I too need these files(tut_comb_sect.x_t, injection-profile, Diesel_1comp_35sp_chem.inp, and Diesel_1comp_35sp_therm.dat), can u mail them to me at climatiquegni@gmail.com. Thanks in advance.

[Guneeth]

i have ANSYS Internal Combustion Engines Tutorial
Guide in Workbench.pdf , in which consist of 4 different examples ..... and but i dot have the related files to perform these simulation

1.Cold Flow Simulation:- files (demo_eng.x_t and lift.prof)

2.Port Flow Simulation:- file (tut_port.x_t)

3.Combustion Simulation for a Sector:- files (tut_comb_sect.x_t, injection-profile, Diesel_1comp_35sp_chem.inp, and Diesel_1comp_35sp_therm.dat)

4.Gasoline Direct Injection Engine Simulation:- files (tut_gdi_comb.x_t, comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv)

Please if any body does have this file can you send me the links or mail me at whmgr.gr@gmail.com

[U384KC]

i have ANSYS Internal Combustion Engines Tutorial
Guide in Workbench.pdf , in which consist of 4 different examples ..... and but i dot have the related files to perform these simulation

1.Cold Flow Simulation:- files (demo_eng.x_t and lift.prof)

2.Port Flow Simulation:- file (tut_port.x_t)

3.Combustion Simulation for a Sector:- files (tut_comb_sect.x_t, injection-profile, Diesel_1comp_35sp_chem.inp, and Diesel_1comp_35sp_therm.dat)

4.Gasoline Direct Injection Engine Simulation:- files (tut_gdi_comb.x_t, comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv)

Please if any body does have this file can you send me the links or mail me at kahchun96@gmail.com

[emrhn_95]

Hi, can you sent me files please it is not available

1.Cold Flow Simulation:- files (demo_eng.x_t and lift.prof)

2.Port Flow Simulation:- file (tut_port.x_t)

3.Combustion Simulation for a Sector:- files (tut_comb_sect.x_t, injection-profile, Diesel_1comp_35sp_chem.inp, and Diesel_1comp_35sp_therm.dat)

4.Gasoline Direct Injection Engine Simulation:- files (tut_gdi_comb.x_t, comb_lift.prof, footprint.txt, massflowrate.csv, and velocity-0.7cd.csv)

Please if any body does have this file can you send me the links or mail me at emrhn_grn@hotmail.com

[YAMA Clovis]

Originally Posted by mohi

hi
also i need the file demo_eng.x_t and lift.prof for ansys 14.5

hi everyone, i also need this demo_eng.x_t and valve lift.prof for ansys 15.0,
can some help me with it via: clovis@glenswayy.com