|
[Sponsors] |
Effect of initial condition for steady state vs Transient |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
August 22, 2018, 04:45 |
Effect of initial condition for steady state vs Transient
|
#1 |
New Member
Prasanna Welahettige
Join Date: Jan 2016
Location: Norway
Posts: 28
Rep Power: 10 |
Hi,
We all know, transient is time depended and steady state is not. Here they have discussed it well. The difference between steady state and transient More than this, I like to know, how initial condition affect for steady state solutions. As an example, in open channel flow, 1). Initialize with no water at channel, only inlet with for a constant flow rate 2).Initialize with half filed water of channel, with the constant inlet flow rate The questions are, In these two cases steady state results are should be equal or not ? Both cases with steady Vs transient results are should be equal or not ? |
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
pimpleDyMFoam computation randomly stops | babapeti | OpenFOAM Running, Solving & CFD | 5 | January 24, 2018 05:28 |
Wrong fluctuation of pressure in transient simulation | caitao | OpenFOAM Running, Solving & CFD | 2 | March 5, 2015 21:33 |
Cannot run the code properly: very large time step continuity error | crst15 | OpenFOAM Running, Solving & CFD | 9 | December 14, 2014 18:17 |
Moving mesh | Niklas Wikstrom (Wikstrom) | OpenFOAM Running, Solving & CFD | 122 | June 15, 2014 06:20 |
pisoFoam with k-epsilon turb blows up - Some questions | Heroic | OpenFOAM Running, Solving & CFD | 26 | December 17, 2012 03:34 |