How to implement solar ray tracing model in Ansys fluent? -- CFD Online Discussion Forums

November 30, 2018, 17:47	How to implement solar ray tracing model in Ansys fluent?	#1
szhang New Member Join Date: Nov 2018 Posts: 3 Rep Power: 7	So I would like to simulate the solar radiation on a simple box. I created a fluid domain (smaller box) inside another fluid domain (larger box). I would like to know the solar radiation flux on the top surface of the small box. The solar vector is (0,0,1), so that only the top surface receives solar radiation. After several attempts, the solar flux remained at zero and I could not figure out what went wrong. Does anyone know what exactly is happening? Is my boundary conditions incorrect or something else is causing this? I also attached the case file, data file and geometry file in this thread. https://drive.google.com/open?id=1tX...Q3V_1HtdR9EIiQ Any help is greatly appreciated. Capture.JPG ddddddd.JPG sdd.JPG

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Fluent - Solar Radiation Model	calvinlai	FLUENT	1	September 15, 2017 06:35
Segmentation fault on PEMFC model addon/ Ansys Fluent	dui0828	FLUENT	0	July 10, 2017 14:27
Salinity Gradient Solar Pond Model .. Fluent	CSolarFD	FLUENT	1	November 18, 2015 08:37
Using radiation model for simulation of flat plate solar collector	marjanbn	FLUENT	2	March 15, 2015 10:27
solar ray tracing	yosr	FLUENT	0	January 29, 2009 10:40

All times are GMT -4. The time now is 04:30.