CFD Post Application Error: 'wbload' action requires parameter: 'id'.

gusymtz · November 2, 2012, 08:57

Hi,

I've finished some simulations through the Fluent application in ANSYS. I wanted to transfer my results to the Results Application in Workbench. When I tried to open the application, this error came up:

'wbload' action requires parameter: 'id'.

Thanks to this, I have not been able to process the results I got from Fluent.

Any recommendation or thoughts on this?

Thanks,

Gustavo

Soheyl.ysf · May 7, 2014, 14:58

Hi Gustavo,

Unfortunately, i have the same problem right now with CFD-Post
i cannot find what I have done wrong before. i appreciate if you could help me here. no one else has mentioned this error anywhere

Markus117 · October 20, 2014, 04:28

I figured out, why this error message came up for me:

I loaded Fluent files which had the hash key (#) in their name. After renaming the files the error didn't show up. So check your files for any special characters.

gurjeet singh · February 12, 2016, 00:34

I have done some simulations in fluent. after the completion i got results from result section. after that when i tried to save that results i found error of 'Application Error In CFD-post'. i am not able to understand what exactly its meaning. i am also confused that the results which i have got are correct or not. please help me related this error.

M.Shousha · September 29, 2016, 06:07

I've faced the same problem with the following error
"Ansys Workbench
Application Error in CFD-Post: ERROR 'wbload' action requires parameter: 'id'."

To solve this problem I saved the project without any special characters (Like; #@!&*$%^") in the address, as advised by "Markus117"

Thanks

mucd7 · October 10, 2022, 16:29

Hi. I don't understand what you mean. I am having the same issue. My project name has no characters.

November 2, 2012, 08:57	CFD Post Application Error: 'wbload' action requires parameter: 'id'.	#1
gusymtz New Member Gustavo Martinez Join Date: Nov 2012 Posts: 1 Rep Power: 0	Hi, I've finished some simulations through the Fluent application in ANSYS. I wanted to transfer my results to the Results Application in Workbench. When I tried to open the application, this error came up: 'wbload' action requires parameter: 'id'. Thanks to this, I have not been able to process the results I got from Fluent. Any recommendation or thoughts on this? Thanks, Gustavo

May 7, 2014, 14:58	same problem	#2
Soheyl.ysf New Member Soheil Join Date: Apr 2014 Location: Charlotte, NC Posts: 2 Rep Power: 0	Hi Gustavo, Unfortunately, i have the same problem right now with CFD-Post i cannot find what I have done wrong before. i appreciate if you could help me here. no one else has mentioned this error anywhere

October 20, 2014, 04:28	problem solved	#3
Markus117 New Member Join Date: Oct 2014 Posts: 1 Rep Power: 0	I figured out, why this error message came up for me: I loaded Fluent files which had the hash key (#) in their name. After renaming the files the error didn't show up. So check your files for any special characters. Hossein1 likes this.

February 12, 2016, 00:34	Application Error In CFD-post	#4
gurjeet singh New Member Gurjeet Singh Join Date: Feb 2016 Posts: 1 Rep Power: 0	I have done some simulations in fluent. after the completion i got results from result section. after that when i tried to save that results i found error of 'Application Error In CFD-post'. i am not able to understand what exactly its meaning. i am also confused that the results which i have got are correct or not. please help me related this error. Yemin likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ANSYS Meshing] Displaying solid domains in CFD Post without meshing them.	hda	ANSYS Meshing & Geometry	5	October 24, 2016 09:26
Cfd to ansys thermal to ansys structural interface	ssixr	ANSYS	17	July 31, 2015 15:18
public CFD Code development	Heinz Wilkening	Main CFD Forum	38	March 5, 1999 11:44
CFD Application in hydraulics valve flow	Roger Yang	Main CFD Forum	11	February 11, 1999 16:53
post processing in CFD	MANISH BHARGAVA	Main CFD Forum	0	October 17, 1998 20:51

September 29, 2016, 06:07		#5
M.Shousha New Member Moustafa Raafat Shousha Join Date: Jan 2016 Posts: 6 Rep Power: 10	I've faced the same problem with the following error "Ansys Workbench Application Error in CFD-Post: ERROR 'wbload' action requires parameter: 'id'." To solve this problem I saved the project without any special characters (Like; #@!&*$%^") in the address, as advised by "Markus117" Thanks

October 10, 2022, 16:29		#6
mucd7 New Member Meftah Join Date: Oct 2022 Posts: 1 Rep Power: 0	Hi. I don't understand what you mean. I am having the same issue. My project name has no characters.