CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

non premixed Combustion by using oxygen droplets

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   January 7, 2020, 02:09
Default non premixed Combustion by using oxygen droplets
  #1
New Member
 
Uttar Pradesh
Join Date: Jan 2020
Posts: 1
Rep Power: 0
sindhuja priyadarshini is on a distinguished road
I am trying to simulate a case in ANSYS FLUENT for combustion of methane and oxygen where oxygen enters the domain in the form of droplets.

There is a change in temperature but there is no formation of flame structure. Has someone tried DPM cases or if someone can help me to fix the case setup.
sindhuja priyadarshini is offline   Reply With Quote

Reply

Tags
dpm fluent, droplet evaporation, non premixed combustion

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
non premixed combustion with ''compressibility effects'' enabled Muneeb FLUENT 5 November 15, 2018 02:06
How to model liquid Hydrogen and liquid oxygen non premixed combustion in Fluent. crazyharry FLUENT 1 August 17, 2017 02:20
partial premixed combustion model early combustion than expected omaradel FLUENT 0 June 27, 2017 14:38
How to model premixed combustion using partially premixed combustion model in Fluent? sab10012 FLUENT 0 October 6, 2015 01:18
Partially Premixed Combustion - Direct Fired Boiler oknus FLUENT 0 April 10, 2012 10:52


All times are GMT -4. The time now is 09:55.