[Stanley90]

Originally Posted by ntech

I'm using Ansys 15.0 and windows7 64bit, seems to be the only combination having this problem. After two weeks I finally found a solution. You might need some experties to adapt it to your case depending on your version of Ansys and type of windows 7.

Here is it

1.
Check to make sure the following folders exist
C:\WINDOWS
C:\WINDOWS\System32
C:\WINDOWS\System32\wbem

2.
Press your "start" button and type "cmd" (Command Prompt DOS) right click and run as administrator'.
You should have "c:\windows\system32>_" in the black window

Type in the following one after the other and press enter.

regsvr32.exe ole32.dll
regsvr32.exe atl.dll
regsvr32.exe oleaut32.dll
regsvr32.exe scrrun.dll

regsvr32.exe jscript.dll

regsvr32.exe vbscript.dll

Between step 2 and 3, you might have to restart your system OR use the task manager. When you open the task manager, end every process related to ansys (hint: they will usually be at the top and ansys will be visible in the name and/or descripition section Under "processes" tab in the task bar.


3.
Rename v150 from %APPDATA%\ansys\v150 to v150.old (where %APPDATA% is where your APPDATA variable is set to - 'Just type %APPDATA% in the Explorer Address bar' and it will take you there).
Rename .ansys from %TEMP% to old.ansys (same as above, just type: %TEMP% in the address bar)

4.
Run the ProductConfig.exe from C:\Program Files\ANSYSInc\v150\commonfiles\tools\winx64
and configure the application again, by right-clicking the productconfig.exe file and select 'Run as Administrator',
First click on "Add .Net security exception for ANSYS, Inc products"
Secondly click on "configure products" and select everything..

5.
Run the CLIENT ANSLIC_ADMIN Utility > Set license preferences for user... > v150 and make sure that the license options are set correctly here, (license order you want to have and that is showing the features you will use with ANSYS), so that the new preferences file is created.

6.
Check the graphics driver for the card installed on the machine and make sure it is running the latest driver. If not, update the driver.

Many part of this tread has offered the solution prescribed here in bits, essentially this is everything combined together.

Enjoy Ansys.

Hi
Thanks very much for your big knowledge in this area. I've just solved a problem with AnsysWBU.exe file.
Are you IT specialist or you have large experience in configure this kind of problems?