|
[Sponsors] |
February 16, 2012, 06:22 |
2way FSI Fluent Mechanical SETUP Problems
|
#1 |
Member
Join Date: Apr 2011
Posts: 32
Rep Power: 15 |
Hi there,
corresponding to the official System Coupling pdf by Ansys, I tried to setup my own 2way FSI. Fluent and Mechanical can solve their own parts, but in the FSI it seems that they dont communicate via system coupling. What does the following message mean? Btw, I have no further output __________________________________________________ ______________________ +================================================= ===================+ | Setup Validation | +================================================= ===================+ No warnings or errors. DBG | Starting RPC server... DBG | Registering cosimulation participants... DBG | Writing SCS file... DBG | Waiting for expected service provider connections from: DBG | * Solution 7 DBG | * Solution 5 DBG | Before serve one request for connections... DBG | Request served - Scanning to see if all required service providers have been registered... DBG | Before serve one request for connections... DBG | _RPCRegisterServiceProvider called from DBG | (Name, Host, Port): (Solution 5, *computer*, 49294) DBG | Request served - Scanning to see if all required service providers have been registered... DBG | Last provider to connect: Solution 5 DBG | Before serve one request for connections... DBG | DBG | Stop file found... DBG | Code : 2 DBG | Message: System coupling run aborted by user: A solver failure occurred during the run in the system. DBG | Connecting to service provider: Solution 5 +================================================= ===================+ | System Coupling Co-Simulation Summary | +================================================= ===================+ Participant : Solution 5 Version/Build Info = 14.0.0 DBG | Disconnected service provider: Solution 5 System coupling run completed with errors. __________________________________________________ ______________________ |
|
February 16, 2012, 10:58 |
|
#2 |
Member
Join Date: Apr 2011
Posts: 32
Rep Power: 15 |
its a weird failure...
It helped to remove+recreate the "system coupling" part in the workbench. Now, it runs through the Setup Validation and System Coupling Co-Simulation Summary, but crashes there with: System Coupling Exception Origin Fluent Error Code 20 Description: ... coupling requested ChartableData-> GetRootLevelName: communication socket unexpectedly disconnected *** FATAL *** CP = 2.524 TIME= 15:37:24 The system coupling service error notification: Exception originated from the noted participant when the coupling service requested ChartableData->GetRootLevelName: Communication socket unexpectedly disconnected. Last edited by MainzerKaiser; February 17, 2012 at 09:39. |
|
February 17, 2012, 09:57 |
|
#3 | |
Member
Join Date: Apr 2011
Posts: 32
Rep Power: 15 |
ok
this is a license problem, the following thread helped: http://www.eng-tips.com/viewthread.cfm?qid=315702 Quote:
|
||
June 8, 2013, 14:40 |
tutorial file
|
#4 |
New Member
sahand
Join Date: Apr 2013
Location: tehran
Posts: 10
Rep Power: 13 |
hi
i would appreciate that if someone could mail me this tutorial. sahand.onfire@yahoo.com thanks in advance |
|
November 23, 2014, 15:46 |
|
#5 |
New Member
Azadeh Saeedi
Join Date: Mar 2014
Location: Canada
Posts: 23
Rep Power: 12 |
Thank you a lot for uploading the both question and answer. It helped me.
|
|
March 3, 2016, 09:09 |
FSI - Setup Problem
|
#6 |
New Member
Awais
Join Date: Mar 2016
Posts: 15
Rep Power: 10 |
Hi,
I am doing a similar setup for FSI but I receive the following error message. " The system coupling service error notification: Duplicate service provider - disconnected" I have checked the license preferences and they are using separate license for each application. Can anyone guide me with this ? ¬Awais |
|
May 11, 2016, 06:34 |
|
#7 |
New Member
okay
Join Date: May 2016
Posts: 3
Rep Power: 10 |
I am doing a similar setup for FSI but I receive the following error message.
echec de la mise à jour du composant solution dans couplage de système. System coupling run with errors. Additionnal information reconditioned conjugate gradient solver error-level 1-possibly,the model is unconstrained or additional iterations may be needed.try running setting the multiplier MULT on the EQSLV command to greater than 1.0 but less than 3.0 " Can anyone guide me with this ? TRIGUI |
|
May 20, 2016, 11:22 |
|
#8 | |
New Member
Awais
Join Date: Mar 2016
Posts: 15
Rep Power: 10 |
Quote:
Trigui, Have a look at the following link, it might apply to your case as well: http://www.cfd-online.com/Forums/ans...ian-fluid.html |
||
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Exporting fluent melting/solidification model results to ansys mechanical apdl | omair11 | ANSYS | 3 | August 28, 2013 06:22 |
Problems with FLUENT MPI on i7 2600K/P8P67 | TaurusASV | FLUENT | 1 | May 5, 2011 11:58 |
Setup for Fluent Flux Reports | Jallen13a | FLUENT | 7 | November 18, 2010 10:32 |
how to extend FSI 2D codes to 3D, need advises | abouziar | Main CFD Forum | 1 | May 30, 2008 04:08 |
Problems with Fluent | Jacek | Main CFD Forum | 2 | August 16, 2002 04:14 |