CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS

FSI Question

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   February 24, 2012, 12:11
Default FSI Question
  #1
Member
 
sheth roh
Join Date: Jul 2011
Posts: 56
Rep Power: 15
sheth is on a distinguished road
IS FSI possible with multibody having some relative motion in ANSYS.

In my analysis, I started ANSYS Transient Module. The analysis I am doing consist some relative motion between two body, one is fixed and one has revolute joint. I am analysing how this relative motion will affect the flow around it.

The ANSYS solver is run first and then CFX. When I setup everything and run the ANSYS solver gives this error:

Quote:
*** WARNING *** CP = 0.594 TIME= 21:41:04
ANSYS results must be written into the database for Multifield
analysis. The /CONFIG,NOELDB,1 command is ignored.
SERVE GLOBAL COUPLING INFORMATION

ADDITIONAL SYNCHRONIZATION FOR CFX:

SECOND SYNCHRONIZATION POINT OF MASTER CODE:
GET INTERFACE MESHES, INITAIL VALUES, and RESTART LOADS

*** ERROR *** CP = 0.641 TIME= 21:41:05
CONTAC171 through CONTAC177 elements with KEYOP(2)=2 are invalid
elements for the Multifield Solver.

*** ERROR *** CP = 0.641 TIME= 21:41:05
CONTAC171 through CONTAC177 elements with KEYOP(2)=2 are invalid
elements for the Multifield Solver.
2nd sync. point: Get interface mesh

*** ERROR *** CP = 0.703 TIME= 21:41:05
Error during setup - Skipping the remaining MultiField analysis.

*** ERROR *** CP = 0.703 TIME= 21:41:05
Error during setup - Skipping the remaining MultiField analysis.
sheth is offline   Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Fluid-Structure Interaction (FSI) with OpenFOAM rlc138 OpenFOAM Running, Solving & CFD 27 February 9, 2018 20:51
[Other] Remeshing fails in FSI pramo4d ANSYS Meshing & Geometry 0 February 17, 2011 06:14
User-defined force transfer across FSI interface vivekcfd CFX 7 March 10, 2010 21:43
BCs in an FSI simulation of a flexble pipe vivekcfd OpenFOAM 10 January 8, 2010 05:14
1-way FSI Vs. 2-way FSI k_buz Main CFD Forum 0 May 12, 2009 05:10


All times are GMT -4. The time now is 01:16.