CFD Online Logo CFD Online URL
Home > Forums

Entries for December 2021

Register Blogs Members List Search Today's Posts Mark Forums Read


CFD Blog (1): OpenFOAM small bits: How to compile new solver

Posted December 27, 2021 at 11:42 by Ash Kot

Hello Engineers and Scientists,

(If this is your first time then you may like read it, or you can skip it if itís not your first time)

Being involved in CFD engineering and development/programming, I decided to dedicate some of the learning to community by writing through blog towards new budding CFD developers and engineers. So that new people donít have to start from scratch. In this blog series, I shall try to create link to connect my files over...
Posted in Uncategorized
Views 178 Comments 0 Ash Kot is offline Edit Tags

CFD Post Expression over time chart (without monitor point)

Posted December 9, 2021 at 05:58 by oakin

So easy solution for time dependent analysis charts.

Originally Posted by Badi View Post
well I found it out. Just for everyone whoever finds it.

1. Make the Expression you want. (e.g. volumeInt(vapour.Volume Fraction)@Default Domain)

2. Make a chart and tick the transient box => location: Expression

3. Take the x-axis time and y-axis with the variable from your expression

4. click apply and see your expression over time chart
New Member
Posted in Uncategorized
Views 113 Comments 0 oakin is offline Edit Tags

2D_Panel-CFD v0.0.1 Release

Posted December 8, 2021 at 04:06 by Fluidentity13

General Background
The project has been started as an Open Source repository for CFD solvers. The motive is to provide handy easy to understand code with multitude of CFD schemes for CFD developers. Also, it needs to remain functional as an easy to setup open source solver for users. This release only comprises of a terminal sequential prompt, simple and effective. We have immediate plans of implementing a PyQT GUI to it.


git clone
New Member
Posted in Uncategorized
Views 161 Comments 0 Fluidentity13 is offline Edit Tags

All times are GMT -4. The time now is 10:31.