[Boat]

Looking for an engineer with experience within 3D modelling and Computational Fluid Dynamics that can do some simulations of a new boat hull with free water surface and bring out resistance values and simulation models. The 3D model need some changes. The project will consist 10-20 simulations in different speeds etc and maybe geometric improvements. The hull solution can be a little bit complex and we have a budget of about three thousand usd in first round. If it success, maybe we also will do further simulations dependent to the results.

[saikat454]

I am a naval architect by profession based in US and have loads of CFD experience with fluent & cfx. I am very interested to discuss further.

-Saikat

[rohansharmafree]

I have 10+ years of industrial experience in product development using CFD tools. I have analyzed various kinds of mechanical/aerodynamic/hydrodynamic systems. I have simulated such cases in past. I have simulated complex geometries with complex physics.
I have good experience to deal such problems and i can perform accurate CFD analysis, which can also be validated with tested results. I only need CAD model in general CAD format (e.g. .igs, .stp or parasolid).
I have also have expertise in CAD modification.
You can mail the project detail on rohansharmafree@gmail.com