UDF for fully developed flow at inlet

John222 · December 1, 2017, 07:38

Hi all

I created a UDF code to make the flow at inlet fully developed for a 3d circular cross section pipe to be modelled in LES. The pipe is 12 inch diameter and the speed is 13 m/s at inlet.

I need to verify it and cross check with any similar works done in the past in published papers or reports.

Let me know your suggestions.

hares · December 2, 2017, 06:07

I can try , mail me if it is still available
mohamedhares2011@gmail.com

Quote:

Originally Posted by John222

Hi all

I created a UDF code to make the flow at inlet fully developed for a 3d circular cross section pipe to be modelled in LES. The pipe is 12 inch diameter and the speed is 13 m/s at inlet.

I need to verify it and cross check with any similar works done in the past in published papers or reports.

Let me know your suggestions.

December 1, 2017, 07:38	UDF for fully developed flow at inlet	#1
John222 Member John Join Date: Jan 2011 Posts: 69 Rep Power: 15	Hi all I created a UDF code to make the flow at inlet fully developed for a 3d circular cross section pipe to be modelled in LES. The pipe is 12 inch diameter and the speed is 13 m/s at inlet. I need to verify it and cross check with any similar works done in the past in published papers or reports. Let me know your suggestions.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
UDF for fully developed flow at inlet	John222	FLUENT	2	December 1, 2017 16:09
Please help me ( udf for regulation the mass flow rate at the inlet )	swidi	Fluent UDF and Scheme Programming	0	July 7, 2015 09:17
UDF for inlet mass flow rate	rahulsuresh89	Fluent UDF and Scheme Programming	1	October 16, 2010 17:06
How to specify an inlet boundary conditions for a fully developed gas flow in a duct.	legendyxg	FLUENT	2	May 11, 2010 07:32
UDF for fully developed turbulent pipe flow	Maged	FLUENT	1	June 11, 2005 10:37