Mesh visualization in CFX-post

ttu004 · March 18, 2014, 20:40

Hi there

Is it possible to turn the mesh on in CFX post so that I can see how the mesh moves/rotates with the motion of domain? I am simulating a pitch oscillating aerofoil, and I want to know if my meshes have correctly made the rotation

Thanks for any suggestions and hints

Tom

Lance · March 19, 2014, 02:33

You can visualize the mesh on a plane/surface at:
'Render tab/Show mesh lines' on the settings for a plane

ttu004 · March 19, 2014, 02:55

Quote:

Originally Posted by Lance

You can visualize the mesh on a plane/surface at:
'Render tab/Show mesh lines' on the settings for a plane

Yes, I have just figured it out
Thanks

March 18, 2014, 20:40	Mesh visualization in CFX-post	#1
ttu004 New Member Tom Join Date: Oct 2013 Location: Auckland, New Zealand Posts: 24 Rep Power: 12	Hi there Is it possible to turn the mesh on in CFX post so that I can see how the mesh moves/rotates with the motion of domain? I am simulating a pitch oscillating aerofoil, and I want to know if my meshes have correctly made the rotation Thanks for any suggestions and hints Tom

March 19, 2014, 02:33		#2
Lance Senior Member Lance Join Date: Mar 2009 Posts: 669 Rep Power: 22	You can visualize the mesh on a plane/surface at: 'Render tab/Show mesh lines' on the settings for a plane tino_boelke and mamly like this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[ICEM] issue occur after extrude 2D airfoil mesh and convergence problem in CFX	shiyun	ANSYS Meshing & Geometry	4	May 9, 2012 19:55
cfx mesh problem...	mactech001	ANSYS Meshing & Geometry	0	November 5, 2009 02:19
CFX mesh & ICEM	mike	CFX	3	April 27, 2006 15:27
hex mesh using cfx mesh.	mehul	CFX	3	December 12, 2005 22:06
Mesh from ICEM CFD to CFX ! Error ! Why ? Thanks !	Vu Trinh Tuan	CFX	11	March 28, 2005 19:04