[cote2714]

I have this problem with Execution Control in the cfx.pre

when I have to work with multiple configurations. I have to create my input file (.mdef) but I have this warning message and then got the following error.

any help is welcome. Thaks


--------------------------------------------------------------------------------
The Solver Input File value will be ignored when the solver is started as CFX-Pre is within Workbench.


-------------------------------------------------------------------------------
Remesh Object: Remesh 1
Activated by condition: Interrupt Condition 1

Executing remesh command:
/software/ansys/v140/icemcfd/linux64_amd/bin/icemcfd -batch
-script
/software/ansys/v140/CFX/etc/Remeshing/icemcfd_Remesh.rpl

CFX Solver Results generated before remeshing have been written to:
/home/arrabiye/Ansys/MMesh3/Results/NMMesh_04_014/6_oldmesh.res

Text output generated during remeshing has been written to:
/home/arrabiye/Ansys/MMesh3/Results/NMMesh_04_014/6_remesh.out





+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| ANSYS CFX Solver Input File does not exist |
+--------------------------------------------------------------------+


+--------------------------------------------------------------------+
| The following user files have been saved in the directory |
| /home/arrabiye/Ansys/MMesh3/Results/NMMesh_04_014: |
| |
| cfx5mondata.out, cfxpre_engine_error.log, 6_remesh.out, |
| 6_oldmesh.res |
+--------------------------------------------------------------------+


This run of the ANSYS CFX Solver has finished.

[Lance]

Originally Posted by cote2714

Executing remesh command:
/software/ansys/v140/icemcfd/linux64_amd/bin/icemcfd -batch
-script
/software/ansys/v140/CFX/etc/Remeshing/icemcfd_Remesh.rpl

CFX Solver Results generated before remeshing have been written to:
/home/arrabiye/Ansys/MMesh3/Results/NMMesh_04_014/6_oldmesh.res

Text output generated during remeshing has been written to:
/home/arrabiye/Ansys/MMesh3/Results/NMMesh_04_014/6_remesh.out

Im guessing the remesh failed and did not generate a new file. What does it say in 6_remesh.out?

[cote2714]

Originally Posted by Lance

Im guessing the remesh failed and did not generate a new file. What does it say in 6_remesh.out?

Sorry, post the error was not. This gives me the error actually.



+--------------------------------------------------------------------+
| |
| Remeshing |
| |
+--------------------------------------------------------------------+


Remesh Object: Remesh 1
Activated by condition: Condicion 1

Executing remesh command:
C:\Program Files\ANSYS
Inc\v150\icemcfd\win64_amd\bin\icemcfd.bat -batch -script
C:\Program Files\ANSYS
Inc\v150\CFX\etc\Remeshing\icemcfd_Remesh.rpl

CFX Solver Results generated before remeshing have been written to:
D:\Simulaciones
Tesistas\PIG\Caja-Tubo\ICEM-CFX\ICEM-CFX_files\dp0\CFX-1\CFX\C-
FX_001\Configuration1_001\141_oldmesh.res

Text output generated during remeshing has been written to:
D:\Simulaciones
Tesistas\PIG\Caja-Tubo\ICEM-CFX\ICEM-CFX_files\dp0\CFX-1\CFX\C-
FX_001\Configuration1_001\141_remesh.out





+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| ANSYS CFX Solver Input File does not exist |
+--------------------------------------------------------------------+


+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| Unable to retrieve 141_remesh.out from working directory: Cannot |
| move to D:\Simulaciones |
| Tesistas\PIG\Caja-Tubo\ICEM-CFX\ICEM-CFX_files\dp0\CFX-1\CFX\CFX_- |
| 001\Configuration1_001\141_remesh.out: Permission denied |
+--------------------------------------------------------------------+


+--------------------------------------------------------------------+
| Warning! |
| |
| An error has occurred during creation of a directory for |
| additional output files. To avoid losing results, the working |
| directory D:\Simulaciones |
| Tesistas\PIG\Caja-Tubo\ICEM-CFX\ICEM-CFX_files\dp0\CFX-1\CFX\CFX_- |
| 001\Configuration1_001.dir will be kept at the end of the run. |
| Please tidy this directory up yourself when you have extracted |
| what you need from it. |
+--------------------------------------------------------------------+


+--------------------------------------------------------------------+
| The following user files have been saved in the directory |
| D:\Simulaciones |
| Tesistas\PIG\Caja-Tubo\ICEM-CFX\ICEM-CFX_files\dp0\CFX-1\CFX\CFX_- |
| 001\Configuration1_001: |
| |
| 141_newmesh_01.mesh.log, cfx5mondata.out, cfxpre_engine_error.log, |
| temp.fbc, temp.fbc_old, 141_remesh.out, 141_oldmesh.res |
+--------------------------------------------------------------------+


+--------------------------------------------------------------------+
| Warning! |
| |
| After waiting for 60 seconds, 1 solver manager process(es) appear |
| not to have noticed that this run has ended. You may get errors |
| removing some files if they are still open in the solver manager. |
+--------------------------------------------------------------------+


This run of the ANSYS CFX Solver has finished.

[Lance]

Originally Posted by cote2714

Text output generated during remeshing has been written to:
D:\Simulaciones
Tesistas\PIG\Caja-Tubo\ICEM-CFX\ICEM-CFX_files\dp0\CFX-1\CFX\C-
FX_001\Configuration1_001\141_remesh.out

+--------------------------------------------------------------------+
| An error has occurred in cfx5solve: |
| |
| Unable to retrieve 141_remesh.out from working directory: Cannot |
| move to D:\Simulaciones |
| Tesistas\PIG\Caja-Tubo\ICEM-CFX\ICEM-CFX_files\dp0\CFX-1\CFX\CFX_- |
| 001\Configuration1_001\141_remesh.out: Permission denied |
+--------------------------------------------------------------------+

Seems like workbench isnt doing what it is supposed to do. Is there a file called 141_remesh.out in that directory? Anyway, have you tried to run cfx stand-alone instead? Is it write-protected?
I never understood the benefit of using workbench...

[cote2714]

Originally Posted by Lance

Seems like workbench isnt doing what it is supposed to do. Is there a file called 141_remesh.out in that directory? Anyway, have you tried to run cfx stand-alone instead? Is it write-protected?
I never understood the benefit of using workbench...

the file is there in that directory. and not protected.


when active control of execution, sends me this message.


The Solver Input File value will be ignored when the solver is started as CFX-Pre is within Workbench.

[cote2714]

Originally Posted by Lance

Seems like workbench isnt doing what it is supposed to do. Is there a file called 141_remesh.out in that directory? Anyway, have you tried to run cfx stand-alone instead? Is it write-protected?
I never understood the benefit of using workbench...

Can i send my project?