|
[Sponsors] |
6DOF Model Rocket Stability with Changing Mass |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
March 18, 2016, 19:38 |
|
#2 |
Super Moderator
Glenn Horrocks
Join Date: Mar 2009
Location: Sydney, Australia
Posts: 17,728
Rep Power: 143 |
The easiest way would be to do a series of models, each one moving the centre of mass a bit to account for the fuel burn; with the rest of the meshing redone to suit. Then use the output of the previous simulation as the input to the next one.
|
|
Tags |
6dof, cfx, mass change |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
sliding mesh problem in CFX | Saima | CFX | 46 | September 11, 2021 07:38 |
Discrete Phase Model, outlet mass flow rate does not fit | edu_aero | FLUENT | 29 | February 3, 2020 08:38 |
Convergence problem with Spalart-Allmaras Turbulence Model using mass flow at exit | sagarparikh31 | Main CFD Forum | 0 | September 4, 2015 05:25 |
Wrong flow in ratating domain problem | Sanyo | CFX | 17 | August 15, 2015 06:20 |
Changing inlet mass fractions of CH4 and O2 | Prateep Chatterjee | FLUENT | 4 | June 13, 2002 12:06 |