|
[Sponsors] |
![]() |
![]() |
#1 |
Guest
Posts: n/a
|
Hi, Sirs, is it possible under CFX to simulate turnulence with LES or DNS? Thanks Zhang
|
|
![]() |
![]() |
![]() |
#2 |
Guest
Posts: n/a
|
The best way to obtain the information or code capabilities is to ask code vendor directly (even a feature is not in the existing version, it may be in the next version) - alternatively each code's internet site also provides some information.
|
|
![]() |
![]() |
![]() |
#3 |
Guest
Posts: n/a
|
Hi,
Yes it is possible to using LES and even DNS from CFX. By using the user fortran interface it is possible to implement different subgrid scale models to perform LES. Best Regards Jens |
|
![]() |
![]() |
![]() |
#4 |
Guest
Posts: n/a
|
Hi,
Is there anybody who implemented LES in user Fortran? And if so are you willing to share that file with the CFD community? Kind regards, Niels Deen Chemical Engineering Laboratory, Aalborg University Esbjerg Homepage: http://hugin.aue.auc.dk/nd/ |
|
![]() |
![]() |
![]() |
#5 |
Guest
Posts: n/a
|
In response to your question:
C.B. Jacobsen, 1997, Ph.D. Thesis, Numerical Part, Aalborg University, Institute of Energy Technology. He has done LES with CFX-4.2 on a combustion Chamber Flow. He used the Smagorinsky model and the mixed (Bardina) model. The (main) user Fortran routines are listed in the back of the Thesis. Marco Derksen |
|
![]() |
![]() |
![]() |
#6 |
Guest
Posts: n/a
|
But Where I can find his thesis? He publish it in internet? Best regards
Sincerely yours Li Xinfeng |
|
![]() |
![]() |
|
|
![]() |
||||
Thread | Thread Starter | Forum | Replies | Last Post |
[ICEM] Proper way to name boundaries on 2D model for use in CFX? | RossFS | ANSYS Meshing & Geometry | 4 | November 10, 2011 02:38 |
Pros and Cons for CFX, CFdesign, COMSOL | Val | Main CFD Forum | 3 | June 10, 2011 02:20 |
CFX pressure in Simulations problem | nasdak | CFX | 1 | April 14, 2010 13:22 |
PhD using CFX | Rui | CFX | 9 | May 28, 2007 05:59 |
CFX 4.4 installation problem | Pandu Sattvika | CFX | 1 | December 1, 2001 04:07 |