Boundary condion of solid domain

m.r.rony93 · June 16, 2018, 01:07

i have a problem with a solid domain in CFX pre. Few fins are placed on a surface of thickness 2.5 mm , and this geometry is placed on a heat source, and heat is conducted from source . I wanna see the heat distribution in the domain. Is this solid domain adiabatic or something else? and what should I use about the source, inlet or wall??

ghorrocks · June 16, 2018, 05:15

This sounds very similar to the heat coil tutorial example. So please go to the ANSYS customer webpage and look at the heat coil tutorial example.

m.r.rony93 · June 24, 2018, 02:15

Thank you!
I tried to figure out. Can't find completely according to my problem. If possible, Can you please provide me any link?

ghorrocks · June 24, 2018, 04:35

Are you saying you cannot find the tutorial examples or that you have completed the tutorial but don't understand how to do your case?

m.r.rony93 · June 25, 2018, 22:15

I understand my problem what to do with it but don't know to deal with CFX pre . I have a problem with this software . I saw few related tutorial in youtube but all of their work done by ANSYS fluent or workbench . As a new comer i can't compare them with CFX pre.

That's why I am asking for a link (pdf or video ) which done by CFX pre

Particularly, processor's heatsink thermal analysis will be better for me .

ghorrocks · June 26, 2018, 02:52

Lots of tutorials are available on the ANSYS Customer website (https://support.ansys.com/portal/sit...CustomerPortal). This is only available to commercial and research licenses and not to student licenses. Students can access the student resources at (https://www.ansys.com/academic/free-...port-resources).

June 16, 2018, 01:07	Boundary condion of solid domain	#1
m.r.rony93 New Member Md. Mizanur Rahman Join Date: Jun 2018 Posts: 4 Rep Power: 7	i have a problem with a solid domain in CFX pre. Few fins are placed on a surface of thickness 2.5 mm , and this geometry is placed on a heat source, and heat is conducted from source . I wanna see the heat distribution in the domain. Is this solid domain adiabatic or something else? and what should I use about the source, inlet or wall??

June 16, 2018, 05:15		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,705 Rep Power: 143	This sounds very similar to the heat coil tutorial example. So please go to the ANSYS customer webpage and look at the heat coil tutorial example. __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

June 24, 2018, 04:35		#4
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,705 Rep Power: 143	Are you saying you cannot find the tutorial examples or that you have completed the tutorial but don't understand how to do your case? __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

June 26, 2018, 02:52		#6
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,705 Rep Power: 143	Lots of tutorials are available on the ANSYS Customer website (https://support.ansys.com/portal/sit...CustomerPortal). This is only available to commercial and research licenses and not to student licenses. Students can access the student resources at (https://www.ansys.com/academic/free-...port-resources). __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
My radial inflow turbine	Abo Anas	CFX	27	May 11, 2018 01:44
Out File does not show Imbalance in %	Mmaragann	CFX	5	January 20, 2017 10:20
Sudden increase the residual of Maxwell's equations	hsezsz	CFX	2	October 13, 2016 06:58
Basic Nozzle-Expander Design	karmavatar	CFX	20	March 20, 2016 08:44
Question about heat transfer coefficient setting for CFX	Anna Tian	CFX	1	June 16, 2013 06:28

June 24, 2018, 02:15		#3
m.r.rony93 New Member Md. Mizanur Rahman Join Date: Jun 2018 Posts: 4 Rep Power: 7	Thank you! I tried to figure out. Can't find completely according to my problem. If possible, Can you please provide me any link?

June 25, 2018, 22:15		#5
m.r.rony93 New Member Md. Mizanur Rahman Join Date: Jun 2018 Posts: 4 Rep Power: 7	I understand my problem what to do with it but don't know to deal with CFX pre . I have a problem with this software . I saw few related tutorial in youtube but all of their work done by ANSYS fluent or workbench . As a new comer i can't compare them with CFX pre. That's why I am asking for a link (pdf or video ) which done by CFX pre Particularly, processor's heatsink thermal analysis will be better for me .