CFD Online Logo CFD Online URL
Home > Forums > CFX

Particle Tracking

Register Blogs Members List Search Today's Posts Mark Forums Read

LinkBack Thread Tools Display Modes
Old   September 22, 2004, 19:39
Default Particle Tracking
Posts: n/a

I am simulating particle transport in a transient flow in CFX 4.4 . Particles are initialized at 0.1 m above ground. After about 35 secs physical time, CFX stops calculating particle trajectory and write in output file "***** INTEG: MORE THAN 2000 CALLS TO ONESTP IN THIS CV"

If anybody can help with this ....

  Reply With Quote

Old   October 22, 2004, 17:38
Default Re: Particle Tracking
Posts: n/a
Hello Sankalp,

I am not sure but try checking the fortran file for the maximum path limit your particles are allowed to travel. There is a variable MAXPTH which has to be increased. This allows the particles to pass through the entire geometry to outlet. Let me know if this helps your problem.

  Reply With Quote


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Blood Damage Modelling via Particle Tracking in a Centrifugal Heart Pump scatman CFX 5 May 5, 2011 07:23
massless particle tracking problem Renold FLUENT 0 January 26, 2011 15:23
Particle Tracking for ion Jun CFX 2 August 31, 2010 08:19
Number density tracking rather than particle tracking Rebecca Main CFD Forum 2 April 23, 2009 12:52
DPM UDF particle position using the macro P_POS(p)[i] dm2747 FLUENT 0 April 17, 2009 01:29

All times are GMT -4. The time now is 05:49.