|
[Sponsors] |
January 25, 2005, 12:08 |
Explosion simulation in CFX 5
|
#1 |
Guest
Posts: n/a
|
Hi
Anyone work is working with explosion simulation in CFX 5.7. I would like to discuss some ideas and results. Kind Regards Jens |
|
January 26, 2005, 08:54 |
Re: Explosion simulation in CFX 5
|
#2 |
Guest
Posts: n/a
|
More to the point has annyone ever tried this other than using CFX4 ? What are the long term plans for AutoReagas ?
|
|
January 27, 2005, 02:33 |
Re: Explosion simulation in CFX 5
|
#3 |
Guest
Posts: n/a
|
Hi,
Yes, CFX 5 has been used in an EU project call EXPRO, where DDT scenarios using Hydrogen has been investigated. However we try to use similar approach as in EXPRO project but for Methan-Air mixture. But we are having a few problems with the generation of the pressure wave. Regards Jens |
|
January 27, 2005, 12:50 |
Re: Explosion simulation in CFX 5
|
#4 |
Guest
Posts: n/a
|
Is there any info on the web about this Jens ? I've not herd of the EXPRO Project.
|
|
January 27, 2005, 14:15 |
Re: Explosion simulation in CFX 5
|
#5 |
Guest
Posts: n/a
|
Hi
Yes there are a lot of paper from this project. That a look at: http://batchelor.uc3m.es/expro/expro.html Have you attempted explosion simulation in CFX ? Regards Jens |
|
January 31, 2005, 11:13 |
Re: Explosion simulation in CFX 5
|
#6 |
Guest
Posts: n/a
|
Had a colleague who tried this many years ago in CFX4.
Used the example of the advancing flame front throught the baffled tube as a starting point. I believe there are CFX papers on this. But as for trying this in the latest version of the code - no I haven't tried it. Interesting proiblem - how to accomodate all the turbulence effects. What are you looking to model ? |
|
January 31, 2005, 14:34 |
Re: Explosion simulation in CFX 5
|
#7 |
Guest
Posts: n/a
|
Hi,
Sofar I am using a rather simpel channel with different set of baffel arrangement. Yes I know the CFX papers on this, there is also a report from about 10 years ago. (NB: are you inhouse?) The model I use are both eddy break-up and the turbulence flame closure model combined with the DES turbulence model. Sofar I have been working about 4-6 weeks with the simulation of explosions and have reached a break point now, I think. However the simulation are rather time consumning compared to special explosion codes like Exsim or AutoReagas. Reagards Jensn |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Wave simulation in CFX | solimcfd | CFX | 21 | November 23, 2015 16:06 |
Under-relaxation for steady state simulation in CFX | Chander | CFX | 7 | May 1, 2014 12:44 |
Small cluster configuration for pump simulation at CFX | Nevel | Hardware | 2 | April 7, 2014 06:07 |
Initial Values for Trasient simulation with CFX | shaban | CFX | 1 | April 30, 2010 06:25 |
which s/w for turbine simulation, Fluent/ CFX ? | Parag | FLUENT | 0 | March 8, 2007 02:28 |