CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

rotate blade to blade view for cfdpost report

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   November 29, 2018, 04:42
Default rotate blade to blade view for cfdpost report
  #1
New Member
 
vladimir krejci
Join Date: Mar 2009
Location: Czech Republic
Posts: 20
Rep Power: 17
Lada is on a distinguished road
I've run into a problem setting up the blade to blade view from cfdpost turbo mode so the meridional axis of the view is not horizontal but vertical. This way one could make more efficient use of screen when depicting, e.g. a ring of vanes/blades, as it makes a vertical ribbon on the screen by default. When the 'CAMERA' is modified for the particular figure 'VIEW' object, it has no effect on what happens in the figure. Unlike with any figure created outside the turbo mode.
I can shift the view when in the figure edit mode (interactive work), and even rotate it, but the latter is never passed to the report.
Is there a way to rotate the view for the report at all?
Attached Images
File Type: png b2b_view_default.PNG (79.3 KB, 33 views)
File Type: png b2b_view_rotated.PNG (62.0 KB, 19 views)
Lada is offline   Reply With Quote

Old   November 29, 2018, 05:16
Default change legend range in blade to blade view
  #2
New Member
 
vladimir krejci
Join Date: Mar 2009
Location: Czech Republic
Posts: 20
Rep Power: 17
Lada is on a distinguished road
I've messed up a new post by posting it as a reply to another post and could find a way to delete it. That's why the text here.

Last edited by Lada; November 29, 2018 at 11:27.
Lada is offline   Reply With Quote

Reply

Tags
blade to blade, cfdpost, report, rotate view

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problem in conducting CFD of analysis of wind turbine blade atulpat CFX 16 August 17, 2013 04:09
Bladegen: Rotate Blade eRzBeNgEl CFX 2 May 14, 2012 06:47
Compressor Blade Analysis in Ansys CFX LynchMobster47 Main CFD Forum 0 April 10, 2012 22:43
How to rotate a blade in fluent? arash_7444 FLUENT 3 October 29, 2011 11:13
how to make blade to rotate inside blender? marco CFX 3 December 1, 2004 16:01


All times are GMT -4. The time now is 14:44.