|
[Sponsors] |
GETTING THE NODES NUMBER FOR A SPECIFIC SURFACE |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 20, 2005, 05:11 |
GETTING THE NODES NUMBER FOR A SPECIFIC SURFACE
|
#1 |
Guest
Posts: n/a
|
Hi all,
I have run a steady state thermal problem of a rotating disc with straigth channels. I have exported the data for the WALL HEAT TRANSFER COEFFICIENT and the WALL ADJACENT TEMPERATURE (csv file), these data preceded by the node numbers. I want to know how I can select from these data, the corresponding data (say node numbers) for a specific set of surfaces: the 4 walls of the channels and their inlet/outlet surfaces. I need to know this in order to perform further calculations with these numbers. Any idea is welcomed. Regards CHGL |
|
July 20, 2005, 06:28 |
DO NOT ANSWER PLEASE... I FOUND IT
|
#2 |
Guest
Posts: n/a
|
THKS.
|
|
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
mesh file for flow over a circular cylinder | Ardalan | Main CFD Forum | 7 | December 15, 2020 13:06 |
[snappyHexMesh] SnappyHexMesh for internal Flow | vishwa | OpenFOAM Meshing & Mesh Conversion | 24 | June 27, 2016 08:54 |
Nusselt number variation over a ribbed surface | avi031 | FLUENT | 2 | March 10, 2011 12:09 |
Constant velocity of the material | Sas | CFX | 15 | July 13, 2010 08:56 |
Unaligned accesses on IA64 | andre | OpenFOAM | 5 | June 23, 2008 10:37 |