How to use user code in CFX

Ugee · January 21, 2020, 13:08

Hello Everyone
I am trying to conduct a simulation in cfx with user code in FORTRAN .I have created a winnt-amd64 file with .dll,.exp,.lib and .o files respectively. I have given the calling name ,library file and directory path in cfx pre as mentioned in ANSYS tutorial pfd. Steady state simulation was run for 10 iteration then the solver stopped with error message "The ANSYS CFX solver excited with return code 194.No result files has been created.and also showing the warning "After waiting for 60 Second ,1 solver manager processor appear not to have noticed that this run has ended.You may get errors removing some files if they are still open in the solver manager."
IN the command window it has shown "the variable <source.F> is being used in C:directory path without being defined image.
I am not getting what does these error means and how to run user code in cfx

Opaque · January 21, 2020, 15:13

Could you post the original messages from the software? Both, the console one as well as the one in the output file.

Ugee · January 22, 2020, 06:31

Ugee · January 22, 2020, 06:37

please help me to upload a picture

Ugee · January 22, 2020, 06:41

Ugee · January 22, 2020, 06:42

I have uploaded the screen capture in 500px image share website and sharing the URL of same image.I dont know why it is showing blank .

Gert-Jan · January 22, 2020, 08:40

In stead of quick reply, use "Go Advanced" and select the paperclip-icon.

ghorrocks · January 22, 2020, 16:48

How to post an image is an FAQ: https://www.cfd-online.com/Wiki/Ansy...n_the_forum.3F

January 21, 2020, 13:08	How to use user code in CFX	#1
Ugee New Member Ugee Join Date: May 2019 Posts: 10 Rep Power: 6	Hello Everyone I am trying to conduct a simulation in cfx with user code in FORTRAN .I have created a winnt-amd64 file with .dll,.exp,.lib and .o files respectively. I have given the calling name ,library file and directory path in cfx pre as mentioned in ANSYS tutorial pfd. Steady state simulation was run for 10 iteration then the solver stopped with error message "The ANSYS CFX solver excited with return code 194.No result files has been created.and also showing the warning "After waiting for 60 Second ,1 solver manager processor appear not to have noticed that this run has ended.You may get errors removing some files if they are still open in the solver manager." IN the command window it has shown "the variable <source.F> is being used in C:directory path without being defined image. I am not getting what does these error means and how to run user code in cfx

January 22, 2020, 16:48		#8
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,705 Rep Power: 143	How to post an image is an FAQ: https://www.cfd-online.com/Wiki/Ansy...n_the_forum.3F __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Particle tracking in CD nozzle error:The ANSYS CFX solver exited with return code 4	lcui	CFX	0	September 9, 2019 20:58
How to get multiple outputs from CFX user routine	doublestrong	CFX	7	April 11, 2017 11:25
CFX user ID error. Plz Help.	Zedd	CFX	1	March 14, 2017 08:05
User code in Star-CCM+	shellnuts	STAR-CCM+	4	October 13, 2013 09:20
CFX User Subroutine Archive	David Creech	Main CFD Forum	0	March 17, 1999 12:41

January 21, 2020, 15:13		#2
Opaque Senior Member Join Date: Jun 2009 Posts: 1,804 Rep Power: 32	Could you post the original messages from the software? Both, the console one as well as the one in the output file.

January 22, 2020, 06:31		#3
Ugee New Member Ugee Join Date: May 2019 Posts: 10 Rep Power: 6

January 22, 2020, 06:37		#4
Ugee New Member Ugee Join Date: May 2019 Posts: 10 Rep Power: 6	please help me to upload a picture

January 22, 2020, 06:41		#5
Ugee New Member Ugee Join Date: May 2019 Posts: 10 Rep Power: 6

January 22, 2020, 06:42		#6
Ugee New Member Ugee Join Date: May 2019 Posts: 10 Rep Power: 6	I have uploaded the screen capture in 500px image share website and sharing the URL of same image.I dont know why it is showing blank .

January 22, 2020, 08:40		#7
Gert-Jan Senior Member Gert-Jan Join Date: Oct 2012 Location: Europe Posts: 1,828 Rep Power: 27	In stead of quick reply, use "Go Advanced" and select the paperclip-icon.