Home > Forums > Software User Forums > ANSYS > CFX

Mesh and convergence issue

Updated Threads

Reply

Search this Thread

July 6, 2020, 19:39	Mesh and convergence issue	#1
bkm New Member Bk Join Date: Sep 2016 Posts: 10 Rep Power: 9	I have done meshing on rectangular plates having water flow at inlet from one side and outlet on another side.when I run my analysis for 1lpm flow in CFX it runs good and converge. But for 3 lpm it is not convergeing it fluctuate in range of 10-4.i am running for steady state. Heat transfer is also there.

July 10, 2020, 04:37		#2
ghorrocks Super Moderator Glenn Horrocks Join Date: Mar 2009 Location: Sydney, Australia Posts: 17,723 Rep Power: 143	This FAQ should help: https://www.cfd-online.com/Wiki/Ansy...gence_criteria __________________ Note: I do not answer CFD questions by PM. CFD questions should be posted on the forum.

Reply

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are On Refbacks are On Forum Rules

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Convergence	Centurion2011	FLUENT	48	June 14, 2022 23:29
[snappyHexMesh] Snappy Hex Mesh - issue with smoothness of the model edges	olek.warc	OpenFOAM Meshing & Mesh Conversion	1	August 31, 2018 11:31
[snappyHexMesh] No layers in a small gap	bobburnquist	OpenFOAM Meshing & Mesh Conversion	6	August 26, 2015 09:38
[ICEM] issue occur after extrude 2D airfoil mesh and convergence problem in CFX	shiyun	ANSYS Meshing & Geometry	4	May 9, 2012 19:55
Convergence moving mesh	lr103476	OpenFOAM Running, Solving & CFD	30	November 19, 2007 14:09

All times are GMT -4. The time now is 08:29.