|
[Sponsors] |
Extracting aerodamping in CFD post as a variable |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
May 13, 2021, 12:12 |
Extracting aerodamping in CFD post as a variable
|
#1 |
New Member
Akshay Chalke
Join Date: May 2021
Posts: 1
Rep Power: 0 |
Hello all,
I am performing a blade flutter simulation in CFX. I set the Aerodynamic damping monitors in the output controls and extract the corresponding damping value from the solution monitor. I would like to know if there is an expression that I can define in the CFD post to extract the value as a variable. I need to perform the blade flutter simulation for a number of nodal diameters. I was planning to define a parameter set with Nodal diameter as input. I wanted to define an output variable as aerodynamic damping that I can set in the parameter set. |
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Post Processing Results: Ansys Workbench 18.2 - Fluent - CFD Post - Porous Body | onlycfd | CFX | 4 | April 29, 2021 03:02 |
Post Processing Results: Ansys Workbench 18.2 - Fluent - CFD Post - Porous Body | onlycfd | FLUENT | 0 | April 28, 2021 23:41 |
Post-processing star ccm+ results in Ansys CFD Post | sidharath | STAR-CCM+ | 4 | April 10, 2017 11:49 |
CFD Post Vector Plot options | saisanthoshm88 | CFX | 3 | November 26, 2012 14:29 |
error in COMSOL:'ERROR:6164 Duplicate Variable' | bhushas | COMSOL | 1 | May 30, 2008 04:35 |