|
[Sponsors] |
How to give temperature and heat generation B.C for a body inside a air domain? |
|
LinkBack | Thread Tools | Search this Thread | Display Modes |
July 17, 2021, 02:01 |
How to give temperature and heat generation B.C for a body inside a air domain?
|
#1 |
Member
Rabi Pathak
Join Date: Jul 2020
Posts: 32
Rep Power: 5 |
I have a computer in a room. The computer has surface temperature of 38 degree C and the heat generated inside the computer is 1000 w/m3. The problem is that when I make the geometry and input it in the cfx, there is a interface created between the computer wall and room air. Thus, not allowing me to put temperature B.C. at the computer surface which acts as a interface. Similarly if i convert the interface into the wall and give my B.C then the effect of convection is not seen, basically the two domains don't interact at all. How can i solve this problem? Please Help.
|
|
Tags |
cfx, heat, interface, source, temperature |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Error - Solar absorber - Solar Thermal Radiation | MichaelK | CFX | 12 | September 1, 2016 05:15 |
Radiation interface | hinca | CFX | 15 | January 26, 2014 17:11 |
Question about heat transfer coefficient setting for CFX | Anna Tian | CFX | 1 | June 16, 2013 06:28 |
Error finding variable "THERMX" | sunilpatil | CFX | 8 | April 26, 2013 07:00 |
air bubble is disappear increasing time using vof | xujjun | CFX | 9 | June 9, 2009 07:59 |