CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

outlet to inlet boundary condition

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   May 9, 2007, 08:50
Default outlet to inlet boundary condition
  #1
assighna
Guest
 
Posts: n/a
Hi every body. I have a transient problem (flow in cavity with one inlet and one outlet boundaries). I want at the end of each time step compute the avera temperature at outlet boundary and put it in the inlet boundary condition. i know the command is in the inlet boundary I just put ave(T)@outlet. But I want it at the end of time step not at the end of iteration. Yours
  Reply With Quote

Old   May 10, 2007, 23:36
Default Re: outlet to inlet boundary condition
  #2
Johnny
Guest
 
Posts: n/a
If you want to store data from a previous timestep, you need to use a Junction Box routine. Check the help doc.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Wind turbine simulation Saturn CFX 58 July 3, 2020 01:13
Outlet boundary condition for wave flume with interFoam solver Arnoldinho OpenFOAM 9 July 10, 2018 05:15
Question about pressure inlet boundary condition. Alina FLUENT 1 November 30, 2007 07:39
Convective Heat Transfer - Heat Exchanger Mark CFX 6 November 15, 2004 15:55
inlet and outlet boundary condition of pump Thammasak CFX 0 February 9, 2004 13:02


All times are GMT -4. The time now is 16:18.