CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

Rotate node via cel

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   September 21, 2007, 03:47
Default Rotate node via cel
  #1
Elian81
Guest
 
Posts: n/a
Hi to every one, I have a problem with cel, i want to simulate a gear pump using a transient simulation in Cfx 11 and i want to do this by cel expression. But i can't write a expression to rotate the wall between the gear and the fluid. I can move the mesh by a traslation but i can't rotate this. Someone can tell me how i can write the expression of uniform circular motion in cel?? Thanks for the attention Elia
  Reply With Quote

Old   September 21, 2007, 14:44
Default Re: Rotate node via cel
  #2
CycLone
Guest
 
Posts: n/a
trigonometry
  Reply With Quote

Old   September 25, 2007, 06:31
Default Re: Rotate node via cel
  #3
Elian81
Guest
 
Posts: n/a
ok i know the mathematics equation but when i traslate it in cel expression language the solver fails and i don't know why . So i ask how i have to indicate the position in the x e y of the node with the cell expression for obtain the new position of the node from the last position. P.S. i had phone to the assistence of engin soft and they told to me that : gear pump can't be simulate with CFX it's too difficult.
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
node values vs. no node values in fluent user0314 FLUENT 4 June 30, 2019 05:14
Export node number and coordinates kezman CFX 2 November 7, 2015 16:45
junction box routine and CEL function bornspur CFX 2 February 3, 2009 03:24
License server not visible from master node Charles FLUENT 0 October 30, 2007 18:48
Full Fluent license required for the master node? Paul FLUENT 1 September 1, 2006 05:26


All times are GMT -4. The time now is 08:32.