Theta angle definition in BladeGen

January 18, 2008, 04:36

I'm trying to make an axial turbine blade in BladeGen. I'm using the Ang/thk Mode and I have a big doubt. In the Blade Angles Dialog, in the Trailing Edge tab there is a Theta Angle. I have read that is the Angular Placement, but I don't really understand which angle is. Could anybody help me?

Thanks

KIRAN P · March 2, 2012, 01:52

hi
I am also having the same doubt..please let me know if you get to know about theta definition...kiranm41@gmail.com

Thanks and regards
KIRAN

mugdha · November 1, 2012, 11:02

I have the same question! Please let me know in case any of you have found out what the theta angle is....
Thanks!

January 18, 2008, 04:36	Theta angle definition in BladeGen	#1
Raul Guest Posts: n/a	I'm trying to make an axial turbine blade in BladeGen. I'm using the Ang/thk Mode and I have a big doubt. In the Blade Angles Dialog, in the Trailing Edge tab there is a Theta Angle. I have read that is the Angular Placement, but I don't really understand which angle is. Could anybody help me? Thanks

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Bladegen Theta specification-centrifugal compresso	avk	CFX	2	April 5, 2019 13:31
[Netgen] Import netgen mesh to OpenFOAM	hsieh	OpenFOAM Meshing & Mesh Conversion	32	September 13, 2011 05:50
OpenFOAM static build on Cray XT5	asaijo	OpenFOAM Installation	9	April 6, 2011 12:21
The Definition of the Flow Angle	yangdick001	Fidelity CFD	3	February 23, 2011 20:58
Definition of the theta function in CFX-PRE	c120613	CFX	2	April 10, 2010 06:24

March 2, 2012, 01:52	re	#2
KIRAN P New Member KIRAN P Join Date: Nov 2011 Location: bangalore Posts: 1 Rep Power: 0	hi I am also having the same doubt..please let me know if you get to know about theta definition...kiranm41@gmail.com Thanks and regards KIRAN

November 1, 2012, 11:02		#3
mugdha New Member Join Date: Apr 2011 Posts: 3 Rep Power: 14	I have the same question! Please let me know in case any of you have found out what the theta angle is.... Thanks!