CFD Online Logo CFD Online URL
www.cfd-online.com
[Sponsors]
Home > Forums > Software User Forums > ANSYS > CFX

CFX- Turbo grid - Calculate the average Static Pre

Register Blogs Members List Search Today's Posts Mark Forums Read

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
Old   April 29, 2008, 07:04
Default CFX- Turbo grid - Calculate the average Static Pre
  #1
Dia
Guest
 
Posts: n/a
Hi All I want to calculate the average static pressure for a case of axial flow turbine. Can u tell me how to do? I'm using CFX. Thanks

Dia
  Reply With Quote

Old   April 29, 2008, 09:47
Default Re: CFX- Turbo grid - Calculate the average Static
  #2
Kumar
Guest
 
Posts: n/a
Hi Dia!

you have not described your problem,what u have done untill now?What u wants to do? Where u want this pressure?

Still if u need avg static pressure on any boundary,u need to get it through Tools>function calculator in CFX-Post. Use function:Massflowavg,Variable as Pressure& location is your required Boundary.

with best regards, Kumar.

  Reply With Quote

Old   April 30, 2008, 04:26
Default Re: CFX- Turbo grid - Calculate the average Static
  #3
dia aisa
Guest
 
Posts: n/a
dear my problem is how to define the boundary condition well,now i set the mass flow rate for inlet and p-static at outlet(p-static=1atm),please what approperiate BC for axial flow water turbine kaplan if the net head is 40m and mass flow in about 116 meter cube/s.also how to present av static pressur is a presssure at required location denote to static pressure.or there is another method to calculate av static pressure
  Reply With Quote

Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
error: uninitialized local variable 't' used MASOUD Fluent UDF and Scheme Programming 5 October 17, 2016 05:24
CFX or Fluent for Turbo machinery ? Far FLUENT 3 May 27, 2011 04:02
Setting material properties - CFX Pre cavani CFX 6 January 27, 2011 20:52
defining a term for a domain using DEFINE_ADJUST MASOUD Fluent UDF and Scheme Programming 1 September 24, 2010 06:08
Troubles modelling flow through a grid Hans Klaufus CFX 1 June 28, 2000 17:43


All times are GMT -4. The time now is 01:28.